Pen Making Starter Kit
This starter kit contains the basic tools needed to create pens, including materials for five twist ballpoint pens.
€77.00
incl. VAT plus shipping costs
Article No. 731505
Pen Making Starter Kit II
This starter kit contains the basic tools needed to create pens, including materials for five twist ballpoint pens.
€109.00
incl. VAT plus shipping costs
Article No. 721246
Pen Turning Set, #2 MT
Starter set for making ballpoint pens, neatly and practically stored in a plastic case. Includes the most important tools and utensils for turning writing utensils.
€107.50
incl. VAT plus shipping costs
Article No. 731573
Sleeve Insertion Tool
Practical insertion tool with soft grip for writing utensil sleeves from 7-11 mm. The sleeves are simply slipped onto the conical shaft and glued into the drilled pen blank; excess glue no longer gets onto the fingers and can be easily...
€15.20
incl. VAT plus shipping costs
Article No. 731020
Pen Blank Vice
Thanks to the scored clamping jaws, every pen blank, whether squared, polygonal or round-shaped is fixed firmly and centrally. The clamping jaws open and close symmetrically, which has the advantage that the vice only needs to be aligned...
€86.90
incl. VAT plus shipping costs
Article No. 707750
Pen Press for Creating Pens, Standard
A pen press is used to combine the brass sleeves with the remaining components of a pen set. The elements are loosely inserted into each other, placed in the device, and pressed together with a single lever stroke. No need for...
€78.50
€64.00
incl. VAT plus shipping costs
Article No. 707751
Pen Press for Creating Pens, Deluxe
This high-quality pen press allows for an even more precise and rapid pressing of pen elements. An additional quick adjustment mechanism makes it possible to save time with elements of different sizes. Fine adjustment takes place...
€79.90
incl. VAT plus shipping costs
Article No. 707752
Teknatool SuperNOVA2 Jaws for Pen Blanks
These unique jaws have been especially designed to make it possible to drill pen blanks/square blanks on a woodturning lathe. The advantage of having two jaws is that the blank will always be clamped in the centre, regardless of...
€37.60
incl. VAT plus shipping costs
Article No. 720693
Pen Turning Mandrel for Pens, #2 MT
Pen turning mandrel with sliding clamping shaft for manufacturing pens and smaller turning projects. Precision-made with good true running accuracy Sunken grub screw for reduced risk of injury Collet fits rod diameter 6.2 mm, working...
€41.70
incl. VAT plus shipping costs
Article No. 731510
Mandrel Support, #2 MT
The mandrel support is a recommended connecting element between the mandrel and tailstock quill. It ensures that the mandrel is guided in a pressure-free and exact manner. Improves true running accuracy and protects against damage....
€37.50
incl. VAT plus shipping costs
Article No. 731511
Face-Milling Cutter with Bradawl
Once the brass sleeve is glued into the pen, the faces are cut square with the face-milling cutter, while the awl cleans the inside of the brass sleeve.
€26.70
incl. VAT plus shipping costs
Article No. 731512
Bradawl for Sleeves
The bradawl cleans the inside of the brass sleeves once the pen blanks have been glued. Use with face-milling cutter No. 731512 or 731513 .
€8.90
incl. VAT plus shipping costs
Article No. 731514
Finial Mandrel Kit, #2 MT
The Finial Mandrel provides pressure-free support for the fine end of a turned piece while the rest of it is being turned. The set includes three interchangeable nylon inserts in sizes 3 mm, 4.5 mm and 6 mm, which fit into the inner ring...
€46.90
incl. VAT plus shipping costs
Article No. 731518
Axminster Woodturning Pen Trimmer and Reamer Set
The set includes a trimmer with hexagonal shaft as well as ten interchangeable pen reamers in various sizes (7 mm, 8 mm, 11/32", 3/8", 10 mm, 10.5 mm, 27/64", 15/32", 12.5 mm and 37/64"). Once the brass sleeve is glued inside the blank,...
€119.00
incl. VAT plus shipping costs
Article No. 745295