Sjöbergs Insertion Clamp
Solid clamp for clamping workpieces to the bench top and the front of the bench apron. Also suitable for clamping on the bench support in the base leg of the DICTUM Workbench »Deluxe 2000«. Large diameter 58 mm plastic pad prevents...
€49.80
incl. VAT plus shipping costs
Article No. 706328
Veritas Bench Clamps
This clamping tool will make your workbench even more versatile. The shaft can be inserted into a 19 mm drill hole anywhere on the bench’s top, front or frame. Irregularly shaped workpieces are no match for this clamping system with its...
€36.20
incl. VAT plus shipping costs
Article No. 705926
Square Bench Dogs, 1 pair
Aluminium bench dogs with steel pressure spring for fixing at the required height. Fits DICTUM workbenches »Allround 1700« und »Deluxe 2000«.
€73.40
incl. VAT plus shipping costs
Article No. 706321
Ulmia Aluminium Bench Dogs, Ø 30 mm, 1 Pair
Round, rotatable bench dogs with a dual ball detent system. The bench dogs’ planar clamping surface can be turned around and adjusted to the individual form of the workpiece, thus ensuring a perfect hold. Fits DICTUM Workbench »Allround...
€63.40
incl. VAT plus shipping costs
Article No. 706086
Veritas Brass Bench Dogs, 1 Pair
Cylindrical brass posts (Ø 19 mm) with side springs. The textured jaws have an inward cant (2°) to prevent the workpiece from slipping upwards. Two pieces each. Fits DICTUM workbench »Junior« (No. 706300 , 706077 and 706302 ) and DICTUM...
€23.70
incl. VAT plus shipping costs
Article No. 705924
Brass Bench Dogs, 1 Pair, Ø 19 mm
Cylindrical brass bolts (Ø 19 mm) with retaining springs. Knurled jaws with 2° inclination to prevent the workpiece from coming off. Two pieces each. Fits DICTUM Workbench »Junior« (No. 706300 , 706077 and 706302 ), Add-On Vice with...
€17.90
incl. VAT plus shipping costs
Article No. 707868
Veritas Hold Down Clamp, Ø 19 mm
Workpieces in all forms and shapes, which are hard to clamp down, can now be held in place easily and securely. The toothed rod is inserted into a horizontal or vertical 19 mm hole on the workbench plate. Tightening the nut activates the...
€99.90
incl. VAT plus shipping costs
Article No. 705760
Bench Wrench
Fits DICTUM workbenches and Lie-Nielsen vice mechanisms. Maple handle rod, red beech knobs.
€6.90
incl. VAT plus shipping costs
Article No. 706340
Lie-Nielsen Bench Vice Handle
High-quality maple vice handle. The end caps are set off with brass bolsters and screwed into the handle rod with brass screws. The brass bolsters are cushioned with rubber O-rings.
€39.90
Article No. 705727
Universal Multi-purpose Grease, 50 g
Ultra-smooth, universal lithium grease. For spindles, bearings, sliding surfaces, and components that need to be protected and remain movable. Grease pad suitable for filling grease guns. Burning point > 200 °C, dripping point > 190 °C.
€3.80
(Content: €76.00 / 1 kg)
incl. VAT plus shipping costs
Article No. 810090
Lie-Nielsen Holdfast
High-quality holdfast of cast ductile iron for clamping workpieces on the workbench. The slight curve of the head provides space to work. The forged shaft is flexible enough to grip the workpiece firmly, but can easily be loosened by...
€65.90
Article No. 705761
Insertion Clamp, Ø 30 mm
This clamp allows workpieces to be fastened in the centre of the worktop or at the front of the workbench. Made in cooperation with a German clamp manufacturer. Fits Ulmia workbenches and DICTUM Workbench »Allround 1700«.
€101.60
incl. VAT plus shipping costs
Article No. 706320