Veritas Tapered Drill Bit
When clamped in a brace with four-jaw chuck, this drill bit conically enlarges cylindrical holes. For boreholes with a diameter of 11-30 mm. Wedge angle 12.8°, fits Veritas cone cutters (No. 701880 - 701882 ). Fitting brace braces No....
€58.20
incl. VAT plus shipping costs
Article No. 701867
Veritas Cone Cutter
For cutting conical ends on cylindrical rods, e.g. Windsor chair legs, rungs, etc. Wedge angle 12.8°, adjustable blade with straight cutting edge 63 mm long, carbon steel (60 HRC), aluminium body. Fits tapered drill bit No. 701867 .
€49.90
incl. VAT plus shipping costs
Article No. 701880
Veritas Dowel and Rod Cutter
This practical tool is used for producing precisely rounded rods and dowels from square stock. Using a hand drill and adapter, the square-shaped wood is driven through the dowel cutter, which is attached to the workbench. For short...
€47.00
incl. VAT plus shipping costs
Article No. 706962
€4.10
incl. VAT plus shipping costs
Article No. 706968
Veritas Dowel Rod Cutter
An ingenious tool which allows you to make perfectly sized dowel rods from square timber. Simply make slightly oversized (+ 3 mm) square blanks and use a power drill to drive them through the dowel maker. The tool has two blades...
€244.00
incl. VAT plus shipping costs
Article No. 703657
€51.30
incl. VAT plus shipping costs
Article No. 703658
Veritas Tenon Cutters, Rounded Shoulders
The mortise and tenon joint is a sturdy wood joint ideal for making chair legs, rungs, frames and other structures. With rustic and green wood furniture they allow elegant, glue-free construction of high durability. Driven by an electric...
€104.00
incl. VAT plus shipping costs
Article No. 706980
Adapter for Veritas Tenon Cutter
With rectangular shaft for mounting in a brace. Fits No. 706980 -82.
€14.90
incl. VAT plus shipping costs
Article No. 706992
Veritas Mini Tenon Cutters
The mortise and tenon joint is a sturdy wood joint ideal for making chair legs, rungs, frames and other structures. With rustic and green wood furniture they allow elegant, glue-free construction of high durability. Driven by an electric...
€54.60
incl. VAT plus shipping costs
Article No. 706985
Cylindrical Tenon Cutter, 5-Piece Set
For cutting cylindrical tenons for mortise jointing as well as for making wooden dowels up to 70 mm in length. Five pieces in a wooden case, carbon steel. Shaft diameter 13 mm. Tenon diameters 10 / 12 / 16 / 20 / 25 mm
€104.50
incl. VAT plus shipping costs
Article No. 701870
€7.00
incl. VAT plus shipping costs
Article No. 706966
Fisch Tenon Cutters, 5-Piece Set
For drilling very long knot-hole plugs, discs and tenons up to a max. length of 70 mm. The multi-cutting tenon cutters are slightly oversized to ensure the knot-hole plugs fit tightly. For vertical drilling machines. Easy ejection of the...
€309.00
incl. VAT plus shipping costs
Article No. 707472