Veritas® Bench Planes No. 4½, A2 Blade
Product no.:
703678
Brand:
Veritas Tools Inc.
€324.00 €272.27
per piece(s)
Delivery time 5-10 business days
- Blade material A2 steel
- Blade thickness 3.2 mm
- Blade width 60 mm
- Design / cutting angle Bevel down / cutting angle 40°-45°
- Form Bevel down / cutting angle 40°-45°
Description
Blade of A2 steel cryogenically hardened to 61 HRC with good edge-holding ability.
The all-purpose woodworking plane. This tool enables chatter-free planing thanks to its fully supported blade and a mouth that can be adjusted without removing the cap iron or blade. Thanks to the central adjusting screw, the blade feed and lateral position can be adjusted quickly and precisely. The rear handle and frog form a movable unit that defines the mouth opening without the need to readjust the cutting depth. The tool’s heavy weight makes it easier to plane irregular grains or difficult woods.
With a blade width of 60 mm, the 4 ½ bench plane from Veritas is the perfect tool for smoothing large surfaces. The plane's 3.2 mm thick blade and 2.3 kg weight ensure it runs smoothly and produces the best results, even with difficult grain patterns. The large handles are comfortable to hold, and the rear extension handle makes it easy to control vibration and distribute pressure. Two set screws constrain the blade laterally, ensuring the blade stays in place regardless of the pressure placed upon it. Large sole, combined feed and lateral adjustment lever.
With a blade width of 60 mm, the 4 ½ bench plane from Veritas is the perfect tool for smoothing large surfaces. The plane's 3.2 mm thick blade and 2.3 kg weight ensure it runs smoothly and produces the best results, even with difficult grain patterns. The large handles are comfortable to hold, and the rear extension handle makes it easy to control vibration and distribute pressure. Two set screws constrain the blade laterally, ensuring the blade stays in place regardless of the pressure placed upon it. Large sole, combined feed and lateral adjustment lever.
Veritas® Planes
The corporate philosophy of Canadian tool manufacturer Veritas aims to develop new adjustment mechanisms and enhance historic plane design. With bodies made of stress-relieved spheroidal cast iron, these tools are highly resistant to cracking and distortion. Their soles are perfectly plane and trued at right angles to the sides. Their thick blades of high-strength A2 steel are hardened to 60-62 HRC and additionally subjected to a special low-temperature process to achieve a finer grain. Veritas planes are optionally available with PM-V11 blades. (The Custom series models are equipped with PM-V11 blades as standard). Two setscrews on the sides constrain the blade laterally, keeping it in place regardless of the type of stress applied. Unless otherwise stated, the blade is angled at 45°. With their material combination of finely-ground or black-coated cast iron bodies, polished brass setscrews and beautiful torrefied maple handles, these planes are also pleasing to the eye.
Properties
| Blade material: | A2 steel |
|---|---|
| Blade thickness: | 3.2 mm |
| Blade width: | 60 mm |
| Design / cutting angle: | Bevel down / cutting angle 40°-45° |
| Form: | Bevel down / cutting angle 40°-45° |
| Overall length: | 255 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Smoothing (fine finishing) |
| Typ: | Bench planes |
| Weight: | 2.3 kg |
Properties
| Blade material: | A2 steel |
|---|---|
| Blade thickness: | 3.2 mm |
| Blade width: | 60 mm |
| Design / cutting angle: | Bevel down / cutting angle 40°-45° |
| Form: | Bevel down / cutting angle 40°-45° |
| Overall length: | 255 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Smoothing (fine finishing) |
| Typ: | Bench planes |
| Weight: | 2.3 kg |
Accessories
Zubehör
Spare parts
Ersatzteil
Similar items
Ähnliche Artikel
Frequently bought together
Upselling
Matching items
Passend dazu
