Tormek accessories

Tormek Multi Base MB-102

Base for sharpening on the side of diamond wheels No. 716078 , 716079 and 716080 for completely flat cutting-tool edges without hollow grind. The multi-holder is fully adjustable and allows optimal setting for each tool and each jig. The...

€81.30

incl. VAT plus shipping costs

Article No. 716081

See details

Tormek Drill Bit Sharpening Attachment DBS-22

Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...

€229.00

incl. VAT plus shipping costs

Article No. 705231

See details

Tormek Planer Blade Jig SVH-320

For blades of any length, minimum blade width 13 mm.

€184.00

incl. VAT plus shipping costs

Article No. 705207

See details

Tormek Turning Tool Setter TTS-100

For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).

€28.20

incl. VAT plus shipping costs

Article No. 705237

See details

Tormek Multi Jig SVS-50

Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.

€59.20

incl. VAT plus shipping costs

Article No. 705229

See details

Tormek Short Tool Jig SVS-38

For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.

€24.50

incl. VAT plus shipping costs

Article No. 705239

See details

Tormek Moulding Knife Jig SVP-80

Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models. For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for...

€177.00

incl. VAT plus shipping costs

Article No. 705238

See details

Tormek Horizontal Base XB-100

For Tormek T-7 and T-3.

€29.40

incl. VAT plus shipping costs

Article No. 705226

See details

Tormek Universal Support US-103 for T-3 and T-4 Original

With fine adjustment suitable for Tormek T-3, T-4 Original and old series models.

€44.90

incl. VAT plus shipping costs

Article No. 705202

See details

Tormek Universal Support US-105 for T-7

With fine adjustment suitable for Tormek T-7, T-8 and old series models.

€41.90

incl. VAT plus shipping costs

Article No. 705206

See details

Tormek Pro Angle Master WM-200

For setting the grinding angle and checking the bevel geometry. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.

€29.30

incl. VAT plus shipping costs

Article No. 705240

See details

Tormek Sharpening Station (TS-740)

This robust sharpening station offers not just a sharpening table but also storage space for the Tormek sharpening jigs and accessories. You can adjust the working height to fit your exact size. This allows full control over sharpening,...

€799.00

incl. VAT plus shipping costs

Article No. 705233

See details

Tormek Gouge Jig SVD-186 R

For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.

€92.60

incl. VAT plus shipping costs

Article No. 716033

See details

Tormek Woodturner's Kit TNT-808

Includes: Gouge Jig (SVD-186 R) Multi Jig (SVS-50) Tool Rest (SVD-110) Profiled Leather Honing Wheel (LA-120) Turning Tool Setter (TTS-100) Dust Cover for Tormek Sharpening System (MH-380) Instruction box for woodturners (in English)...

€328.00

incl. VAT plus shipping costs

Article No. 705454

See details

Tormek Universal Support, Extended US-430

Extended Universal Support for sharpening long tools, such as knives or machetes. Micro adjust with scale for precise setting. Suitable for Tormek T-8, T-7, T-4 and older series models.

€86.90

incl. VAT plus shipping costs

Article No. 716058

See details

Tormek Case TC-800

The Tormek Case keeps your devices and accessories neatly stored, stackable and easy to carry thanks to the premium leather handle. Fits inserts HTK-00 (No. 716191 ), TNT-00 (No. 716192 ) and T8-00 (No. 716193 ).

€60.60

incl. VAT plus shipping costs

Article No. 716190

See details

Tormek Insert for Hand Tool Kit HTK-806

The HTK-00 insert can be used to store all the devices included in the Hand Tool Kit (No. 705223 ). Suitable for Tormek Case TC-800 (No. 716190 ) and Tormek Sharpening Station T-740 (No. 705233 ).

€26.00

incl. VAT plus shipping costs

Article No. 716191

See details

Tormek Insert for Woodturner's Kit TNT-808

The TNT-00 insert can be used to store all the devices included in the Woodturner's Kit (No. 705454 ). Suitable for Tormek Case TC-800 (No. 716190 ) and Tormek Sharpening Station T-740 (No. 705233 ).

€26.00

incl. VAT plus shipping costs

Article No. 716192

See details

Tormek Insert for T-8 Original Accessories T8-00

The T8-00 insert can be used to store all the devices of the Tormek T-8 Original (No. 716034 ). Suitable for Tormek Case TC-800 (No. 716190 ) and Tormek Sharpening Station T-740 (No. 705233 ).

€24.00

incl. VAT plus shipping costs

Article No. 716193

See details

Tormek CW-220 Composite Honing Wheel

The composite honing wheel has an integrated polishing agent and is easy to handle. An advantage over the leather honing wheel is that the composite wheel can be used in clean environments and no honing paste has to be applied.

€89.90

incl. VAT plus shipping costs

Article No. 716194

See details

Tormek Anti-corrosion Concentrate ACC-150

For cleaning diamond grinding wheels and protecting them against corrosion if not used for a long time. 2 x 150 ml.

€40.70

(Content: €135.67 / 1 litre)

incl. VAT plus shipping costs

Article No. 716077

See details

Tormek Replacement Honing Compound PA-70

The honing paste is used with leather honing wheels. Thanks to the unique properties of the leather combined with the honing paste, the burr is effectively removed without damaging the cutting edge. At the same time, the bevel is finely...

€15.90

(Content: €227.14 / 1 kg)

incl. VAT plus shipping costs

Article No. 705213

See details

Tormek Rubber Work Mat RM-533

This waterproof yet non-slip rubber mat is ideal as a workpad for sharpening machines as well as for sharpening by hand using waterstones. The raised rim and all-round groove will retain any water spillage. The relatively soft material...

€52.10

incl. VAT plus shipping costs

Article No. 705198

See details

Tormek Rotating Base

Enables you to easily rotate the machine 180° and lock it with complete stability. It makes it easy to alternate between sharpening/honing or sharpening towards or away from the edge. Fits all models.

€49.90

incl. VAT plus shipping costs

Article No. 705221

See details

Tormek Stone Grader SP-650

For regrading and dressing Tormek sharpening stones.

€28.40

incl. VAT plus shipping costs

Article No. 705209

See details

Tormek Adjustable Trueing Tool TT-50

With diamond tip, for trueing ingrained or unround grinding wheels.

€81.70

incl. VAT plus shipping costs

Article No. 705210

See details

Tormek Small Knife Holder SVM-00

Enables you to sharpen even the smallest knives like wood carving knives and pocket knives. Used in combination with the Tormek Knife Jig SVM-45.

€36.20

incl. VAT plus shipping costs

Article No. 705232

See details

Tormek Knife Jig

€45.00

incl. VAT plus shipping costs

Article No. 705203

See details

Tormek Axe Jig SVA-170

For axe heads up to 170 mm in size (larger axes can be sharpened without a jig using the universal support).

€16.90

incl. VAT plus shipping costs

Article No. 705228

See details

Tormek Scissors Jig SVX-150

For all straight scissors' blades. Demountable hedge shears up to max. 200 mm. Blade thickness max. 9 mm

€50.90

incl. VAT plus shipping costs

Article No. 705205

See details

Tormek Hand Tool Kit HTK-806

Includes: Short Tool Jig (SVS-38) Axe Jig (SVA-170) Knife Jig (KJ-45) Small Knife Holder (SVM-00) Knife Jig (KJ-140) Scissors Jig (SVX-150) Comes in practical plastic box with hard foam inlay (HTK-00).

€209.00

incl. VAT plus shipping costs

Article No. 705223

See details

Tormek Profiled Leather Honing Wheel LA-120

For honing and polishing the inside of turning tools, gouges and V-shaped tools, interchangeable wheels.

€56.80

incl. VAT plus shipping costs

Article No. 705227

See details

Tormek Converter OWC-1

Attachment to adapt the Tormek bench grinder mounting kit BGM-100 (No. 705225 ) directly to a Wolverine V-arm. It allows to use any Tormek honing guide on double-wheeled grinders with the Wolverine system.

€16.70

incl. VAT plus shipping costs

Article No. 705353

See details

Tormek Bench Grinder Mounting Set BGM-100

Though primarily designed for turners, this mounting set, in combination with the gouge jig (SVD-186 R), the multi jig (SVS-50) and the tool rest (SVD-110), allows you to sharpen all turning tools with the Tormek system also on a...

€87.90

incl. VAT plus shipping costs

Article No. 705225

See details

Tormek Square Edge Jig SE-77

For plane blades and paring chisels. Also suitable for Japanese chisels. Slightly convex cutting shapes can also be sharpened using two setting wheels (included with T-8).

€69.90

incl. VAT plus shipping costs

Article No. 716035

See details