Crown Heavy-duty Bowl Gouge, Ash Handle, Blade Width 9 mm

Traditionally made

Primarily for large-scale facework. Made of round stock with milled, deep flutes.
M2-HSS woodturning tools - exclusively available with ash handle and ready-to-use bevel.
Primarily for large-scale facework. Made of round stock with milled, deep flutes.
Crown Woodturning Tools - Available versions:
M2-HSS woodturning tools with factory grind
Crown standard version, the blade material used is an extremely sturdy M2-HSS. Stained beech handle. Approx. 62 HRC.
M2-HSS woodturning tools with ready-to-use bevel
The blade material used is an extremely sturdy M2-HSS. The version with ash handle manufactured exclusively for DICTUM is additionally provided with a ready-to-use bevel. Approx. 62 HRC.
M2-HSS Cryogenic woodturning tools
Improved edge life and sharpness without compromising on sharpening: Cryogenic hardening is a technically elaborate process, in which the steel is cooled down, computer-controlled, to -185 °C after hardening. After this treatment, the steel has finer carbides that cannot develop during the usual hardening process. This results in excellent properties such as a longer service life than with conventional hardening, a fine cutting edge with reduced burr formation and easier sharpening. Come with ready-to-use bevel and black stained ash handles. Approx. 62 HRC.
M42-HSS Cryogenic Turning Tools - made of an extra-hard HSS-cobalt alloy
Extremely long service life and razor-sharp cutting edges: Originally developed to meet the requirements of metal processing, M42 Steel cuts even exotic hardwood or composite materials effortlessly. The steel provides an exceptionally long service life thanks to the addition of 10% cobalt as well as the cryogenic treatment it undergoes at -185°C during the tempering process. This causes fine carbides to form, which help increase the service life and sharpenability of the steel long-term. Come with ready-to-use bevel and black stained ash handles. Approx. 65 HRC.

PRO-PM woodturning tools - made of ultra hard sintered steel
The ultimate turning tools: PRO-PM gouges are the top of the line for exotic hardwoods, laminates or wood with mineral inclusions. The alloying of steels has its limits due to their different melting points. During sintering, a new type of steel is created from powder steel under the influence of high temperature and pressure, which would not be miscible in the liquid state. The very high percentage of cobalt (8 %) and tungsten (10.5 %) make them highly durable. The tools hold their edge at least five times longer than conventional HSS tools. Come with ready-to-use bevel and black stained ash handles. Approx. 62 HRC.
     
    more
    less
    Further details on the manufacturer

    Crown

    Crown

    Hand-forging and high-grade steels make Crown Tools one of the leading manufacturers of turning tools worldwide. All of their tools are made in Sheffield, England, following a long tradition. The blades are made of ultra-edge-retaining M2-HSS as well as M42-HSS and PRO-PM steel for heavy-duty use and ultimate edge life.

    • Blade width 9 mm
    • Overall length 610 mm
    • Handle material Ash
    • Blade material M2-HSS/fingernail grind (ready-to-use bevel)
    Article no. 720310
    Brand Crown
    €43.60 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Including sharpening pass, two free sharpenings.
    Remember
    Many other models
    Price Quantity
    Ash, M2-HSS/fingernail grind (ready-to-use bevel)
    Crown Heavy-duty Bowl Gouge, Ash Handle, Blade Width 9 mm
    Article number 720310
    Blade width: 9 mm
    Overall length: 610 mm
    Handle material: Ash
      €43.60  
    Entire series
    Continue to the whole series
    Price Quantity
    Stained beech, M2-HSS/factory grind
    Crown Heavy-duty Bowl Gouge, Stained Beech Handle, Blade Width 9 mm
    Article number 720350
    Blade width: 9 mm
    Overall length: 610 mm
    Handle material: Stained beech
      €46.70  
    Crown Heavy-duty Bowl Gouge, Stained Beech Handle, Blade Width 13 mm
    Article number 720351
    Blade width: 13 mm
    Overall length: 610 mm
    Handle material: Stained beech
      €60.10  
    Crown Heavy-duty Bowl Gouge, Stained Beech Handle, Blade Width 16 mm
    Article number 720352
    Blade width: 16 mm
    Overall length: 610 mm
    Handle material: Stained beech
      €73.70  
    Black stained ash, M2-HSS Cryogenic/fingernail grind (ready-to-use bevel)
    Crown Heavy-duty Bowl Gouge, Cryogenic, Blade Width 9 mm
    Article number 701909
    Blade width: 9 mm
    Overall length: 610 mm
    Handle material: Black stained ash
      €68.70  
    Crown Heavy-duty Bowl Gouge, Cryogenic, Blade Width 13 mm
    Article number 701910
    Blade width: 13 mm
    Overall length: 610 mm
    Handle material: Black stained ash
      €77.90  
    Crown Heavy-duty Bowl Gouge, Cryogenic, Blade Width 16 mm
    Article number 701911
    Blade width: 16 mm
    Overall length: 610 mm
    Handle material: Black stained ash
      €96.80  
    Crown Heavy-duty Bowl Gouge, Cryogenic, Blade Width 22 mm
    Article number 701912
    Blade width: 22 mm
    Overall length: 650 mm
    Handle material: Black stained ash
      €175.00  
    Black stained ash, PRO-PM/fingernail grind (ready-to-use bevel)
    Crown Heavy-duty Bowl Gouge, PRO-PM, Blade Width 9 mm
    Article number 728847
    Blade width: 9 mm
    Overall length: 650 mm
    Handle material: Black stained ash
      €74.20  
    Crown Heavy-duty Bowl Gouge, PRO-PM, Blade Width 13 mm, Short
    Article number 701811
    Blade width: 13 mm
    Overall length: 475 mm
    Handle material: Black stained ash
      €80.60  
    Crown Heavy-duty Bowl Gouge, PRO-PM, Blade Width 13 mm
    Article number 701975
    Blade width: 13 mm
    Overall length: 665 mm
    Handle material: Black stained ash
      €98.50  
    Crown Heavy-duty Bowl Gouge, PRO-PM, Blade Width 16 mm
    Article number 701976
    Blade width: 16 mm
    Overall length: 665 mm
    Handle material: Black stained ash
      €129.00  
    Crown Heavy-duty Bowl Gouge, PRO-PM, Blade Width 18 mm
    Article number 701160
    Blade width: 18 mm
    Overall length: 665 mm
    Handle material: Black stained ash
      €214.00  
    Crown Heavy-duty Bowl Gouge, PRO-PM, Blade Width 23 mm
    Article number 701812
    Blade width: 23 mm
    Overall length: 665 mm
    Handle material: Black stained ash
      €232.00  
    Black stained ash, M42-HSS Cryogenic/fingernail grind (ready-to-use bevel)
    Crown Heavy-duty Bowl Gouge, M42-Cryogenic, Blade Width 9 mm
    Article number 728844
    Blade width: 9 mm
    Overall length: 610 mm
    Handle material: Black stained ash
      €74.90  
    Crown Heavy-duty Bowl Gouge, M42-Cryogenic, Blade Width 13 mm
    Article number 728845
    Blade width: 13 mm
    Overall length: 610 mm
    Handle material: Black stained ash
      €91.30  
    Crown Heavy-duty Bowl Gouge, M42-Cryogenic, Blade Width 16 mm
    Article number 728846
    Blade width: 16 mm
    Overall length: 610 mm
    Handle material: Black stained ash
      €114.00  
    Oiled ash, M2-HSS/fingernail grind (ready-to-use bevel)
    Crown Heavy-duty Bowl Gouge, Oiled Ash Handle, Blade Width 9 mm
    Article number 729611
    Blade width: 9 mm
    Overall length: 610 mm
    Handle material: Oiled ash
      €54.10  
    Crown Heavy-duty Bowl Gouge, Oiled Ash Handle, Blade Width 13 mm
    Article number 729612
    Blade width: 13 mm
    Overall length: 610 mm
    Handle material: Oiled ash
      €69.30  
    Crown Heavy-duty Bowl Gouge, Oiled Ash Handle, Blade Width 16 mm
    Article number 729613
    Blade width: 16 mm
    Overall length: 610 mm
    Handle material: Oiled ash
      €87.70  
    Ash, M2-HSS/fingernail grind (ready-to-use bevel)
    Crown Heavy-duty Bowl Gouge, Ash Handle, Blade Width 9 mm
    Article number 720310
    Blade width: 9 mm
    Overall length: 610 mm
    Handle material: Ash
      €43.60