Shinwa Aluminium Try Square without Scale
Precision square with wide stop and low weight. Stock made of aluminium, stainless steel blade. Accuracy 0.1 mm per 100 mm. Without scale.
€23.50
incl. VAT plus shipping costs
Article No. 730539
Shinwa Mitre Square
Stainless steel square for marking 45° and 90° angles with deep-etched millimetre scale. Cutouts in the square allow marking of opposite angles or parallel translation. Precision-ground fence and edges.
€24.80
incl. VAT plus shipping costs
Article No. 717147
Shinwa 3-D Mitre Squares
Can be used for marking 45° and 90° mitres on battens or counterbattens. This saves time and increases precision in making mitre joints or cross cuts. Cutouts in the square allow marking of opposite angles or parallel translation. Made...
€19.90
incl. VAT plus shipping costs
Article No. 717122
Shinwa »Ornament« Mitre Square
Stainless steel mitre square (45°) with deep-etched Japanese ornamentation. Cutouts in the square allow parallel translation. Precision-ground fence and edges. Without scale.
€13.90
incl. VAT plus shipping costs
Article No. 717131
Shinwa Square »Sashigane«, Flexible
This light and easy-to-read stainless steel square is used not only as a framing square and scale, but also as an angle of inclination and try square. The blade is 15 mm wide, the standard measurement in Japan for tenons and board...
€49.90
incl. VAT plus shipping costs
Article No. 717130
Shinwa Square »Sashigane«, 300 mm, Rigid
This light and easy-to-read stainless steel square is used not only as a framing square and scale, but also as an angle of inclination and try square. The blade is 15 mm wide, the standard measurement in Japan for tenons and board...
€54.00
incl. VAT plus shipping costs
Article No. 717132
Shinwa Carpenter's Square
Precise stainless steel square with inside and outside millimetre scale. Deeply etched scale, front and back identical. Accuracy 0.1 mm per 100 mm.
€29.90
incl. VAT plus shipping costs
Article No. 717133
Shinwa Small Carpenter's Square, Standard, incl. Metal Stopper
Rigid stainless steel square with metal stopper in a set for checking the squareness of squared timber and for scribing joints. Stainless steel square with depth-etched mm outer scale and separate inner scale. Drilled inner corner for...
€58.50
incl. VAT plus shipping costs
Article No. 730908
Shinwa Small Carpenter's Square
Rigid stainless steel square for marking fittings and to quickly judge whether squared timber is perpendicular. Deep-etched outer scale and a separate inner scale. Drilled inner corner for precise positioning. Accuracy 0.1 mm per 100 mm.
€22.90
incl. VAT plus shipping costs
Article No. 717328
Shinwa Mini Square
Stainless steel mini square, good value for money. For checking edges or rabbets of small workpieces. Deep-etched scale on both sides, rounded front edges. Accuracy 0.1 mm per 100 mm.
€8.60
incl. VAT plus shipping costs
Article No. 730860
German Carpenter's Square
The standard square for every carpenter is made of rustproof spring steel and has a seamless cut. An etched scale on both sides of the square can be used for external and internal measuring. The holes, spaced 5 mm apart, on the short...
€25.90
incl. VAT plus shipping costs
Article No. 707279
Veritas Sliding Square
The carefully conceived sliding square proves to be the ideal aid for scribing hinges, fittings and mortise joints. The stainless steel plate is graduated along three sides. The right side of the blade can be inscribed by users due to...
€42.50
incl. VAT plus shipping costs
Article No. 703647