Axminster Revolving Live Centre 60° Standard
Standard revolving centre with 60° tapered tip and two sealed, dustproof ball bearings for a long service life.
€43.00
incl. VAT plus shipping costs
Article No. 731700
Axminster Pro Drive, Ø 21 mm
Multi-tooth spur drivers are safer, more versatile and offer higher precision than 2- or 4-tooth drivers. The tension of the spring-loaded centre point can be adjusted. This allows workpieces that are held at axis height by the centring...
€56.00
incl. VAT plus shipping costs
Article No. 731704
Axminster Pro Drive, Ø 16 mm
Multi-tooth spur drivers are safer, more versatile and offer higher precision than 2- or 4-tooth drivers. The tension of the spring-loaded centre point can be adjusted. This allows workpieces that are held at axis height by the centring...
€59.00
incl. VAT plus shipping costs
Article No. 731706
Axminster Revolving Live Centre »Deluxe«
Robust and versatile centring pin with 60° point angle. The morse taper and the replaceable centring pin are made of stainless steel. The removable cone attachment with a ¾" x 16 tpi thread is made of aluminium. A double-row angular...
€113.80
incl. VAT plus shipping costs
Article No. 731723
Axminster Multi-Head Live Revolving Centre, incl. 3 Additional...
A live centre with many application possibilities due to interchangeable tips. Supplied with a 60° standard taper for general work, a tip with 9.5 mm diameter and 16 mm length for small or delicate work and a ring tip for e.g. soft or...
€69.00
incl. VAT plus shipping costs
Article No. 731724
Axminster Tip for Multi-Head Live Revolving Centre, Conical
Offers additional application possibilities for the Axminster Multi-Head Live Revolving Centre (No. 731724 ).
€16.00
incl. VAT plus shipping costs
Article No. 731725
Axminster Tip for Multi-Head Live Revolving Centre, Pipe...
Offers additional application possibilities for the Axminster Multi-Head Live Revolving Centre (No. 731724 ).
€16.00
incl. VAT plus shipping costs
Article No. 731726
Axminster Tip for Multi-Head Live Revolving Centre, Mini...
Offers additional application possibilities for the Axminster Multi-Head Live Revolving Centre (No. 731724 ).
€21.10
incl. VAT plus shipping costs
Article No. 731727
Drill Bits Set, 8 mm, MK2
Specially developed for the production of lamp stands and for drilling through spindles and columns, this deep drill bits set is indispensable. Turn your woodturning obejcts as usual between the included spur drivers, using the...
€106.00
incl. VAT plus shipping costs
Article No. 740062
Finial Mandrel Kit, #2 MT
The Finial Mandrel provides pressure-free support for the fine end of a turned piece while the rest of it is being turned. The set includes three interchangeable nylon inserts in sizes 3 mm, 4.5 mm and 6 mm, which fit into the inner ring...
€46.90
incl. VAT plus shipping costs
Article No. 731518
Axminster Wall-mounted Tool Holder for #2 MT Accessories
With the lacquered wall-mounted tool holder for #2 MT accessories, which can be fixed to the wall using three screws (not included), up to six accessories with a #2 MT morse taper can be stored within easy reach.
€24.10
incl. VAT plus shipping costs
Article No. 730840
Taper Wiper
The felt-covered cone wipers made of native woods help you efficiently remove dirt from tool holders while avoiding damage. When machining wood-based materials, material residues remain in the air, which are pressed against and adhere to...
€8.20
incl. VAT plus shipping costs
Article No. 704262