Sorby™ Revolving Stebcentre, #2 MT, Ø 32 mm
-8%
Product no.:
720380
Brand:
Sorby
€89.00 €74.79
per piece(s) % €97.30 €81.76 (8.53% saved) (You save €8.30)
Delivery time approx. 3-5 working days
- Morse taper #2 MT
- Overall length 130 mm
- Ø 32 mm
Description
Largely inspired by Norwegian turner Petter Herud, the Revolving Stebcentre has been introduced. Not only does it offer the same degree of security as the conventional Stebcentre, but it allows the turner to do basic off-centre turning.
Robert Sorby™ Mitnehmer/Mitlaufkörner
The sprung stainless steel tip and sharp teeth that bite into the wood will guarantee optimal hold. This works even on lathes where the axles (spindle stock to tailstock) are not 100 % aligned. Safe working is guaranteed. The geometry of the teeth also makes this exceptionally good for tensioning unusual shapes. To do this, the piece is tensioned between the Sorby revolving stebcentre and a Sorby drive.
Properties
| Morse taper: | #2 MT |
|---|---|
| Overall length: | 130 mm |
| Ø: | 32 mm |
Properties
| Morse taper: | #2 MT |
|---|---|
| Overall length: | 130 mm |
| Ø: | 32 mm |
Frequently bought together
Upselling
Manufacturer
Sorby
The Robert Sorby company has been known for its range of high-quality woodworking tools for over 200 years. In Sheffield (England) traditional working methods are combined with technical expertise, guaranteeing sophisticated tools with a quality that speaks for itself.
