SawStop Zero-clearance Table Insert for »Compact« Circular Bench Saw
Product no.:
721651K
Brand:
SawStop
€20.00 €16.81
per piece(s)
In stock, delivery time approx. 2-3 working days
- Dimensions 106 x 362 mm
- Fits SawStop »Compact« Circular Bench Saw
- Maschine/Zubehör Accessories
- Maschinen-Typ Circular bench saws
Description
For precise, tear-out-free cuts
The uncut surface of the table insert allows precise customisation between insert and saw blade depending on the blade type and kerf width. Lower the blade, position the zero-clearance insert, level and lock it in place, then slowly raise the running saw blade. As the blade cuts through the insert, a perfectly matched kerf is created between blade and insert. This provides optimal support for the workpiece and reduces the risk of tear-out.
Advantages:
Advantages:
- Positive-locking mechanism allows for tool-free use
- Positioning screws ensure a precise and secure fit in the table
- Pre-cut slots accommodate riving knife and SawStop blade guard
The Active Injury Mitigation (AIM) system by SawStop
This revolutionary safety technology was developed by SawStop to stop the circular saw blade the moment it comes into contact with skin.
The saw blade is supplied with a low-voltage signal. This voltage is continuously monitored on the opposite side of the blade. When a finger touches the blade, the voltage drops because the human body is conductive and grounded. Once a threshold value is undercut, the system triggers within just 25 microseconds. At that moment, a fuse wire melts, releasing a preloaded spring mechanism that propels an aluminium brake block into the spinning blade with high force. The brake stops the blade in approximately 5 milliseconds. Due to the sudden deceleration, the blade is simultaneously retracted below the table surface and pulled away from the point of contact – typically a finger.
Although minor skin injuries such as abrasions may occur, the system effectively reduces the risk of serious cuts.
After activation, the brake cartridge and saw blade must be replaced. However, the replacement process is user-friendly and can be completed within a few minutes.
The saw blade is supplied with a low-voltage signal. This voltage is continuously monitored on the opposite side of the blade. When a finger touches the blade, the voltage drops because the human body is conductive and grounded. Once a threshold value is undercut, the system triggers within just 25 microseconds. At that moment, a fuse wire melts, releasing a preloaded spring mechanism that propels an aluminium brake block into the spinning blade with high force. The brake stops the blade in approximately 5 milliseconds. Due to the sudden deceleration, the blade is simultaneously retracted below the table surface and pulled away from the point of contact – typically a finger.
Although minor skin injuries such as abrasions may occur, the system effectively reduces the risk of serious cuts.
After activation, the brake cartridge and saw blade must be replaced. However, the replacement process is user-friendly and can be completed within a few minutes.
Properties
| Dimensions: | 106 x 362 mm |
|---|---|
| Fits: | SawStop »Compact« Circular Bench Saw |
| Maschine/Zubehör: | Accessories |
| Maschinen-Typ: | Circular bench saws |
Properties
| Dimensions: | 106 x 362 mm |
|---|---|
| Fits: | SawStop »Compact« Circular Bench Saw |
| Maschine/Zubehör: | Accessories |
| Maschinen-Typ: | Circular bench saws |
Manufacturer
SawStop
SawStop is not only a manufacturer of high-quality circular bench saws, but also the inventor of the AIM system, which stops the blade within 5 milliseconds upon skin contact. SawStop’s revolutionary Active Injury Mitigation (AIM) system has saved thousands of fingers and prevented countless serious hand injuries in the United States since the company was founded in 2000. Since 2017, SawStop has been part of Tooltechnic Systems (TTS), which also includes Festool and Shaper.
