DICTUM T-Track
The T-Track is indispensable for mounting fixtures and jigs, for such as clamping boards or milling templates. With the aid of hold down clamps, e.g. No. 727341 , slot nuts or bolts can be quickly and securely clamped and fixed to...
€15.70
incl. VAT plus shipping costs
Article No. 707764
DICTUM HW T-track Cutter, Set
For milling T-tracks, e.g. in workbench tops. The dimensions are matched to the heads of the hex screws with metric thread. These can be inserted directly into the milled grooves without aluminium rails. Also suitable for slot nuts and...
€92.00
incl. VAT plus shipping costs
Article No. 718407
DICTUM HW Edge Banding Shaper Cutter, 2-piece Set
For stable glue joints when attaching edge-glued and glued-in strips, for width joints and mitres. The profile and counter profile enlarge the glued area and create a mechanical connection between the components.
€179.00
incl. VAT plus shipping costs
Article No. 718409
TC Biscuit Jointing Set, Shank Ø 8 mm
The set comprises an arbor (Ø 8 mm shank) with mounted slotting cutter (cutting length 4 mm) and three replaceable ball bearings. Suitable for the three most common biscuit sizes 0, 10 and 20. In combination with the 4 mm straight plunge...
€96.90
incl. VAT plus shipping costs
Article No. 717672
TC Chamfer Bit with ball bearing, Shank Ø 8 mm
For the precise chamfering of edges and joining with the standard angles 45° (rectangle), 30° (six sides), 22.5° (eight sides) and 15° (twelve sides). Chamfer height max. 9.5 mm.
€33.60
incl. VAT plus shipping costs
Article No. 717668
TC Cove Bit with ball bearing, Shank Ø 8 mm
The high-quality ball bearing (Ø 9.5 mm) helps you guide the bit exactly along the edge of the workpiece to cut a precise 1/4 curve.
€36.90
incl. VAT plus shipping costs
Article No. 717665
TC Rounding over Bits with Ball Bearing, Shank Ø 8 mm
Using different cutting depths, you can cut soft curves as well as rebated curves (German moulding) with the same bit.
€35.90
incl. VAT plus shipping costs
Article No. 717772
TC Straight Bit with Top Ball Bearing / Copy Cutter, Shank Ø 8 mm
Bottom- and side-cutting straight bit with bearing on the shank. Ideal for copying curved shapes along a template clamped on top of the workpiece. Can also be used as a trimming bit.
€44.10
incl. VAT plus shipping costs
Article No. 717676
TC Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm
Because of the spiral cutting edge, the bits cut with a pulling action, which produces a very clean-cut edge. The ground spiral also ensures efficient chip removal and enables routing with less pressure (reduced risk of breakage). For...
€46.80
incl. VAT plus shipping costs
Article No. 717786
TC Core Box Bit, Shank Ø 8 mm
Full-length cutting edges which also cut on the end, without bearing. For cutting decorative grooves, grip mouldings, juice grooves and similar. Can also be used for lettering.
€29.90
incl. VAT plus shipping costs
Article No. 717766
TC V-Groove and Engraving Bit, Shank Ø 8 mm
For engraving letters and cutting V grooves and decorative grooves. Also suitable for chamfering hardwood and panel materials.
€26.70
incl. VAT plus shipping costs
Article No. 717764
TC Trimming Bit, Ø 1/2"
To ensure clean cutting of decorative layers, the bearing diameter is exactly equal to the cutting diameter. Can also be used as a copy bit.
€38.50
incl. VAT plus shipping costs
Article No. 717760
TC Rebate Bit Set with 4 Ball Bearings, Ø 34.9 mm
By changing the bearing, you can cut clean rebates at depths of 7.9, 9.5, 11.1 and 12.7 mm. Ideal for rebating curved workpieces. Includes hex key for changing the bearings.
€69.90
incl. VAT plus shipping costs
Article No. 717590
TC Classic Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R...
Classic Roman profile with step and two identical radiuses. The step interrupts the swing of the two opposite radiuses and emphasises the middle of the profile.
€63.80
incl. VAT plus shipping costs
Article No. 717785
TC Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm,...
Roman profile with two identical radiuses, without rebate. Also suitable as a cove bit.
€52.80
incl. VAT plus shipping costs
Article No. 717782
TC Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 4.8 mm, Ø 31.8 mm
Ogee profile with two identical radiuses. Also suitable as a rounding-over bit.
€56.60
incl. VAT plus shipping costs
Article No. 717781
TC Panel-Raising Bit with Ball Bearing, Shank Ø 8 mm, Ogee, Ø...
Elegantly curved ogee profile for classic door and body panels. Profile depth 19 mm. For safe cutting and clean results, we recommend cutting at a low speed (max. 12,000 rpm) and in several passes on a router table. Ideal addition to our...
€87.10
incl. VAT plus shipping costs
Article No. 717778
TC Cavetto Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm, Ø...
For cavetto profiles, concave radius with step and rebate.
€59.90
incl. VAT plus shipping costs
Article No. 717678
TC Straight Plunge Cutters, Shank Ø 8 mm
Bottom- and side-cutting straight cutter with soldered-in TC centre tip. For grooving, rebating and mortising. Suitable for plunge. For work in abrasive materials such as particle boards, MDF, plywood, and hardwood.
€29.30
incl. VAT plus shipping costs
Article No. 717673
UJK Parfguide System MK II
The Parf drilling system is a very precise and fast method for making your own perforated plates for e.g. multifunction tables and workbenches. The 20 mm boreholes in an exact, right-angled grid equipped with Parf Bank Pins or Parf Super...
€229.00
incl. VAT plus shipping costs
Article No. 720774
€39.00
incl. VAT plus shipping costs
Article No. 708087
Festool Roundover cutter HW S8 D20,7/R4 KL
Main areas of application: One tool with two uses - by using the small 9.5 mm ball bearing (included with the delivered items), the router can be converted to an ovolo edge cutter
€66.90
incl. VAT plus shipping costs
Article No. 706670
Festool Roundover cutter S8 HW R2 D20-KL OFK
Main areas of application: Edge-trimming cutter for 2 mm edges with 10° transition
€71.50
incl. VAT plus shipping costs
Article No. 706676
Festool Aluminium cutter HS S8 D5/NL23
Main areas of application: HS spiral groove cutter for cutting grooves for draining water in aluminium profiles
€19.90
incl. VAT plus shipping costs
Article No. 706678
Festool Drilling cutter HW S8 D8/19
Main areas of application: For cutouts of any kind - without pre-drilling, the drilling cutter goes right through the coating material. Through the subsequent routing of contours, splinters on the edges of the coatings are effectively...
€33.90
incl. VAT plus shipping costs
Article No. 706679
Festool Edge trimming cutter HW S8 D12,7/NL25
Main areas of application: Edge trimming cutter with ball bearing below - this allows coatings in and on panel edges to be flush cut. Because of the small ball bearing, even inner radii of 15 mm can be flush cut
€63.20
incl. VAT plus shipping costs
Article No. 706680
Festool Through-hole drill HW S8 D5/30
Main areas of application: "Through-hole drilling bits for rows of holes; suitable for cutting through panels with its longer HW drill bit"
€35.70
incl. VAT plus shipping costs
Article No. 706681
Festool Flute cutter HW S8 D25,5/R6,35 KL
Main areas of application: For every flute cutter, Festool offers a roundover cutter with the same radius (except for R 20). Flute cutters and radius routers can be ideally combined, e.g., for profiles and counter profiles
€48.20
€44.90
incl. VAT plus shipping costs
Article No. 706684
Festool Groove cutter HW S8 D3/6
Main areas of application: More security against small diameter bits breaking because of the low vibration all tungsten carbide cutter design. The partially ground standard tungsten carbide blade provides an increased service life when...
€38.40
incl. VAT plus shipping costs
Article No. 706688
Festool Groove cutter HW S8 D10/25
Main areas of application: Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade
€39.90
incl. VAT plus shipping costs
Article No. 706693
Festool Groove cutter HW S12 D13,2/35 PLANET
Main areas of application: Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade. Together with the routing aids, automatic door seals can be routed on the front
€92.90
incl. VAT plus shipping costs
Article No. 706700
Festool Disk groove cutter HW D40x1,5
Main areas of application: Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm. The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 16 or 28 mm
€24.90
incl. VAT plus shipping costs
Article No. 706701
Festool Script cutter HS S8 D11/60°
Main areas of application: A fine-grained wood is suggested for script cutting because the power tool can then be guided without jerking
€45.20
incl. VAT plus shipping costs
Article No. 706706
Festool Script cutter HW S8 D11/60°
Main areas of application: A fine-grained wood is suggested for script cutting because the power tool can then be guided without jerking
€56.90
incl. VAT plus shipping costs
Article No. 706707
Festool T-slot cutter HW S8 D10,5/NL13
Main areas of application: For routing T-grooves, picture slots and keyhole mountings in solid wood and panel materials
€42.70
incl. VAT plus shipping costs
Article No. 706708
Festool V-groove cutter HS S8 D14/7/90°
Main areas of application: Available for making grooved decorations at 2 different angles
€19.70
incl. VAT plus shipping costs
Article No. 706709
Bridge City DJ-3 Universal Drilling Jig
Bridge City tools combine a high-quality choice of materials with powerful functions and a unique design. The DJ-3 Universal Drilling Jig combines precise drilling, exact dimensional accuracy and secure fixing of round and square...
€532.00
incl. VAT plus shipping costs
Article No. 721321
Bridge City DJ-3-J Jaw Kit
The DJ-3-J Clamping Jaw Set includes the relevant accessories to extend the DJ-3 Drilling Jig. Clamping jaws 45° green: Alignment of the drilling jig on the centre axis of the mitre (max. width 185 mm) Clamping jaws purple and orange:...
€265.00
incl. VAT plus shipping costs
Article No. 721322
Drill Stands with Chuck
Thanks to the integrated geared-rim chuck, this drill stand is ideal for use with cordless screwdrivers. Manually adjustable depth-stop rings Non-slip rubber base V-shaped support for round workpieces on the top of the base High-quality...
€124.70
incl. VAT plus shipping costs
Article No. 716149
Star-M Drill Stand with Chuck, Adjustable
Ideal for use with cordless screwdrivers thanks to the mounted gear rim drill chuck. Large adjustable support base for angled drilling up to 45°. It is locked in place by two plastic knobs. Height 290 mm, support base 90 x 120 mm, jaw...
€96.00
incl. VAT plus shipping costs
Article No. 716356
€6.70
incl. VAT plus shipping costs
Article No. 746241
Fisch Wood Twist Drills Eco
HSS twist drill with excellent price/performance ratio. 10 times the service life of carbon steel: Made of wear- and heat-resistant HSS For use in hardwood, glued wood, acrylic or laminated boards The precision-ground spurs and the...
€54.70
incl. VAT plus shipping costs
Article No. 717818
Fisch Wood Twist Drill Professional, 5-Piece Set
The HSS professional version with excellent service life, unmatched concentricity, and the option of vertical drilling, once in. Made of special HSS with excellent wear- and heat-resistance and service life (higher chromium percentage)...
€38.30
incl. VAT plus shipping costs
Article No. 707041
Fisch Wood Twist Drill Professional
The HSS professional version with excellent service life, unmatched concentricity, and the option of vertical drilling, once in. Made of special HSS with excellent wear- and heat-resistance and service life (higher chromium percentage)...
€5.60
incl. VAT plus shipping costs
Article No. 707005
UJK Pocket Hole Kit
Pocket hole joinery is a fast and easy way to making strong und hidden joints for solid wooden carcass frames, trims, angular constructions, frames for tabletops etc. Ideal for furniture making, kitchen fitting and frame construction No...
€329.00
incl. VAT plus shipping costs
Article No. 704131
UJK Pocket Hole Clamp
Especially developed for the UJK Pocket Hole Jig, this clamp exactly aligns the pocket joint for screwing. The pin is put into one of the drilled pocket holes and clamped. Once the joint is aligned, further drilled pocket holes can be...
€49.00
€43.90
incl. VAT plus shipping costs
Article No. 704132
UJK Torx Screws, Fine Thread
UJK screws with Torx drive head (T20) and fine thread. Galvanised. Refill pack for screw storage box which is part of the UJK Pocket Hole Kit No. 704131 .
€4.90
incl. VAT plus shipping costs
Article No. 704182
UJK Torx Screws, Coarse Thread
UJK screws with Torx drive head (T20) and coarse thread. Galvanised. Refill pack for screw storage box which is part of the UJK Pocket Hole Kit No. 704131 .
€3.20
incl. VAT plus shipping costs
Article No. 704184