DICTUM HW T-track Cutter, Set
For milling T-tracks, e.g. in workbench tops. The dimensions are matched to the heads of the hex screws with metric thread. These can be inserted directly into the milled grooves without aluminium rails. Also suitable for slot nuts and...
€92.00
incl. VAT plus shipping costs
Article No. 718407
DICTUM HW Edge Banding Shaper Cutter, 2-piece Set
For stable glue joints when attaching edge-glued and glued-in strips, for width joints and mitres. The profile and counter profile enlarge the glued area and create a mechanical connection between the components.
€179.00
incl. VAT plus shipping costs
Article No. 718409
TC Biscuit Jointing Set, Shank Ø 8 mm
The set comprises an arbor (Ø 8 mm shank) with mounted slotting cutter (cutting length 4 mm) and three replaceable ball bearings. Suitable for the three most common biscuit sizes 0, 10 and 20. In combination with the 4 mm straight plunge...
€96.90
incl. VAT plus shipping costs
Article No. 717672
TC Chamfer Bit with ball bearing, Shank Ø 8 mm
For the precise chamfering of edges and joining with the standard angles 45° (rectangle), 30° (six sides), 22.5° (eight sides) and 15° (twelve sides). Chamfer height max. 9.5 mm.
€33.60
incl. VAT plus shipping costs
Article No. 717668
TC Cove Bit with ball bearing, Shank Ø 8 mm
The high-quality ball bearing (Ø 9.5 mm) helps you guide the bit exactly along the edge of the workpiece to cut a precise 1/4 curve.
€36.90
incl. VAT plus shipping costs
Article No. 717665
TC Rounding over Bits with Ball Bearing, Shank Ø 8 mm
Using different cutting depths, you can cut soft curves as well as rebated curves (German moulding) with the same bit.
€35.90
incl. VAT plus shipping costs
Article No. 717772
TC Straight Bit with Top Ball Bearing / Copy Cutter, Shank Ø 8 mm
Bottom- and side-cutting straight bit with bearing on the shank. Ideal for copying curved shapes along a template clamped on top of the workpiece. Can also be used as a trimming bit.
€44.10
incl. VAT plus shipping costs
Article No. 717676
TC Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm
Because of the spiral cutting edge, the bits cut with a pulling action, which produces a very clean-cut edge. The ground spiral also ensures efficient chip removal and enables routing with less pressure (reduced risk of breakage). For...
€46.80
incl. VAT plus shipping costs
Article No. 717786
TC Core Box Bit, Shank Ø 8 mm
Full-length cutting edges which also cut on the end, without bearing. For cutting decorative grooves, grip mouldings, juice grooves and similar. Can also be used for lettering.
€29.90
incl. VAT plus shipping costs
Article No. 717766
TC V-Groove and Engraving Bit, Shank Ø 8 mm
For engraving letters and cutting V grooves and decorative grooves. Also suitable for chamfering hardwood and panel materials.
€26.70
incl. VAT plus shipping costs
Article No. 717764
TC Trimming Bit, Ø 1/2"
To ensure clean cutting of decorative layers, the bearing diameter is exactly equal to the cutting diameter. Can also be used as a copy bit.
€38.50
incl. VAT plus shipping costs
Article No. 717760
TC Rebate Bit Set with 4 Ball Bearings, Ø 34.9 mm
By changing the bearing, you can cut clean rebates at depths of 7.9, 9.5, 11.1 and 12.7 mm. Ideal for rebating curved workpieces. Includes hex key for changing the bearings.
€69.90
incl. VAT plus shipping costs
Article No. 717590