€12.90
incl. VAT plus shipping costs
Article No. 830498
Tensioning Knob for DICTUM Bandsaw
Hand knob for tensioning the saw blade. Fits bandsaws Nos. 727447 , 727448 .
€4.20
incl. VAT plus shipping costs
Article No. 830507
€4.90
incl. VAT plus shipping costs
Article No. 830504
Brass Guide Pin for DICTUM Bandsaw BS 200-08 (No. 727446)
Fits DICTUM Bandsaw BS 200-08 (No. 727446 ). Two pins are needed each for the upper (No. 830494 ) and the lower (No. 830493 ) guide.
€1.90
incl. VAT plus shipping costs
Article No. 830493
MAFELL Cordless Cross-Cutting System KSS 40 18M bl
Mafell has not reinvented cross-cutting - but made it easier and more portable. And with the new KSS 40 18M bl, we have even added a battery: one that delivers what it promises - innovative battery technology for maximum performance....
€887.74
incl. VAT plus shipping costs
Article No. 721099K
Dust Port for Bandsaw
Incl. internal protective grid. Fits DICTUM Bandsaw BS 270-10 (No. 727447 ) and BS 320-12 (No. 727448 ).
€4.20
incl. VAT plus shipping costs
Article No. 830502
Table Insert for Bandsaw BS 360-14, 1 Piece
Aluminium table insert suitable for DICTUM Bandsaw BS 360-14.
€4.90
incl. VAT plus shipping costs
Article No. 801007
Saw Blade for Sabre Saw
Saw blade with the precision of a Japanese saw for clean trimming cuts across the grain in soft and hard woods, as well as glued wood and sheet materials. The teeth are extremely wear-resistant for high durability and performance. Even...
€9.90
incl. VAT plus shipping costs
Article No. 712711
Mitre Gauge with Guide Rail, 150 cm
This mitre gauge with guide rail makes formatting and trimming wood-based materials, plaster fibreboards and insulating panels, etc. much easier.. Set the required angle quickly on the rail, saw, done. Without any scribing. Most common...
€454.00
incl. VAT plus shipping costs
Article No. 716395
Mitre Gauge with two Guide Rails
This mitre gauge with guide rail makes formatting and trimming wood-based materials, plaster fibreboards and insulating panels, etc. much easier. Quickly set the required dimensions and angles on the rail, saw, done. Without any...
€744.00
incl. VAT plus shipping costs
Article No. 716396
Cross-cut Rail, 510 mm
With this mitre gauge, floorboards, parquet, planks, squared timber, etc. can be quickly, easily and precisely trimmed. Set the required dimensions and angles on the rail, saw, done. Without any scribing. Most common plunge-cut saws...
€392.00
incl. VAT plus shipping costs
Article No. 716398
Carrying Case for Mitre Gauge with Guide Rail
This bag securely stores and transports any fences and guide rails. Suitable for Mitre Gauges with Guide Rail Nos. 716395 , 716396 , 716397 .
€77.30
incl. VAT plus shipping costs
Article No. 716399