Magswitch SavR Featherboard for Mitre Slots
The featherboard for machine tables ensures safety and optimum workpiece guidance on bandsaws, circular bench saws and router tables with 16 mm and 19 mm mitre slots. The One-Flip lever clamp locks the slot nuts of the featherboard in...
€39.50
incl. VAT plus shipping costs
Article No. 711199
Magswitch Stacked SavR Featherboard
Practical accessory for the Magswitch SavR Featherboard for Mitre Slots (No. 711199 ) that reliably presses flat or lying workpieces against rip fences. This Magswitch extension offers an additional featherboard with spacer to guide tall...
€30.70
incl. VAT plus shipping costs
Article No. 711268
MAFELL Groove-Cutting Machine NFU 50
Groove cutting machine NFU 50 offers flexibility of use and is an all-rounder capable of executing an enormous range of timberconstruction tasks. An extensive range of accessories opens up further possibilities for day-to-day work. The...
€2,604.91
incl. VAT plus shipping costs
Article No. 721075K
MAFELL Groove-Cutting Machine NFU 50
Groove cutting machine NFU 50 offers flexibility of use and is an all-rounder capable of executing an enormous range of timberconstruction tasks. An extensive range of accessories opens up further possibilities for day-to-day work. The...
€3,439.10
€3,092.81
incl. VAT plus shipping costs
Article No. 721551K
MAFELL Multi-cutter MF 26 cc
The design of the MF 26 cc is characterized by the use of extremely rugged, high-quality and precision-made parts, including the lightweight magnesium die-cast housing and impact-resistant, fiber glass-reinforced plastic components. The...
€1,936.13
incl. VAT plus shipping costs
Article No. 721138K
MAFELL Expanding Groove Cutter MF-VN 25, Cutting Width 15.4-25 mm
Fits MAFELL Multi-cutter MF 26 cc.
€641.53
incl. VAT plus shipping costs
Article No. 721141K
€28.92
incl. VAT plus shipping costs
Article No. 721142K
MAFELL Slotting Head MF-SE 3 for cutting 3 slots up to 26 mm
For use on guide rail F. Fits MAFELL Multi-cutter MF 26 cc.
€178.86
incl. VAT plus shipping costs
Article No. 721143K
€12.85
incl. VAT plus shipping costs
Article No. 721162K
Festool Adapter for Copying Ring Adapter Inch /OF 2200
The copying ring adapter for Festool routers allows the use of American copying ring models.
€16.20
incl. VAT plus shipping costs
Article No. 729990
Festool Copying Ring Adapter Inch/OF 1010
The copying ring adapter for Festool routers allows the use of American copying ring models.
€4.60
incl. VAT plus shipping costs
Article No. 729991
Festool Copying Ring Adapter Inch/OF 1400
The copying ring adapter for Festool routers allows the use of American copying ring models.
€22.70
incl. VAT plus shipping costs
Article No. 729992
UJK Universal Dovetail Jig
A combination of precision and sturdiness. The frame of the device is formed from 3 mm thick sheet steel. The hard-anodised surface of the precision-milled aluminium milling templates ensures durability and accuracy. The jig has an...
€495.00
incl. VAT plus shipping costs
Article No. 704261
Shaper Origin incl. Shaper Plate
Shaper Origin combines robotic precision with the simplicity of a hand tool to create a first-of-its-kind machine: a handheld CNC. With its intuitive interface, automatic cut correction and on-tool design, Origin brings digital...
€4,212.60
€4,093.60
incl. VAT plus shipping costs
Article No. 721426K
Shaper Origin
Shaper Origin combines robotic precision with the simplicity of a hand tool to create a first-of-its-kind machine: a handheld CNC. With its intuitive interface, automatic cut correction and on-tool design, Origin brings digital...
€3,796.10
incl. VAT plus shipping costs
Article No. 721422K
Shaper Origin incl. Shaper Workstation
Shaper Origin combines robotic precision with the simplicity of a hand tool to create a first-of-its-kind machine: a handheld CNC. With its intuitive interface, automatic cut correction and on-tool design, Origin brings digital...
€4,331.60
€4,212.60
incl. VAT plus shipping costs
Article No. 721425K
Shaper Origin incl. Shaper Workstation and Shaper Plate
Shaper Origin combines robotic precision with the simplicity of a hand tool to create a first-of-its-kind machine: a handheld CNC. With its intuitive interface, automatic cut correction and on-tool design, Origin brings digital...
€4,748.10
€4,569.60
incl. VAT plus shipping costs
Article No. 721427K
Shaper Plate
The Shaper Plate is universal template designed to install a wide range of hardware, inlays, round corners, route system 32 holes and so much more. Align Plate to your workpiece and let Origin do the rest. Utilise hundreds of digital...
€416.50
incl. VAT plus shipping costs
Article No. 721424K
Shaper Workstation
The efficient clamping device for Origin. Perfect for horizontal and vertical clamping of all workpieces. Align, fix and cut with repeatable accuracy. Workstation is a flexible and efficient clamping device, ideal for implementing even...
€535.50
incl. VAT plus shipping costs
Article No. 721423K
Shaper Dovetail Router Bit
This solid carbide dovetail cutter has been specifically designed to route slots for the Keilverbinder connection system and allows you to produce invisible hardware connections which are robust yet easy to disassemble. Cutting templates...
€71.40
incl. VAT plus shipping costs
Article No. 721460K
Shaper Single Connectors
These connectors make it easy to add simple, strong connections between furniture elements. Ideal for invisible, friction-locked connections, very stable but still detachable. Ideal for both furniture and cabinetry, Keilverbinder...
€17.85
incl. VAT plus shipping costs
Article No. 721470K
ShaperTape
Origin utilises ShaperTape markers to digitally augment your Workspace and accurately track position while you are working. ShaperTape’s uniquely encoded patterns are printed using specialised production equipment designed to ensure...
€22.61
incl. VAT plus shipping costs
Article No. 721428K
Shaper Dovetail Router Bit 15°
This 15° dovetail bit can be your go-to bit for all your dovetail joinery. Two brazed carbide blades cut consistently and accurately in even the hardest woods. Its 15° incline gives you great freedom to take on a wider variety of...
€45.22
incl. VAT plus shipping costs
Article No. 721444K
Shaper Woven Dust Hose, 2.5 m
The Shaper Woven Dust Hose is light, flexible and durable, with a braided sleeve to prevent snagging and pulling. The versatile tapered connector ensures optimum suction power with a wide variety of dust collection systems. Its...
€117.81
incl. VAT plus shipping costs
Article No. 721449K
Shaper T-Slot Router Bit 10.5/5 mm, Shank Ø 8 mm
This T-slot bit adeptly handles a wide range of technical operations. From insetting cables to cutting perimeter T-slots and keyhole mounting, this brazed carbide bit stays sharp, ensuring quality cuts throughout its lifetime....
€45.22
incl. VAT plus shipping costs
Article No. 721443K
Shaper T-LOC Systainer SYS 1
This is no ordinary SYS 1 Systainer - it's a Shaper special, loaded with a customisable (cuttable!) solid foam insert to keep all your small tools and accessories at the ready, and a corrugated foam lid to ensure that everything stays in...
€83.30
incl. VAT plus shipping costs
Article No. 721433K
Shaper Up-Spiral Router Bit Ø 6 mm, Shank Ø 8 mm
This is Origin’s workhorse cutter. The ideal geometry and material for all hard and softwood as well as MDF and plywood. The solid carbide composition keeps your edge sharp even after hours of use, and the two-flute upcut geometry...
€32.13
incl. VAT plus shipping costs
Article No. 721430K
Shaper Up-Spiral Router Bit Ø 3 mm, Shank Ø 8 mm
This cutter is part of Origin's basic equipment. The cutting geometry of the solid carbide is ideal for hard and soft woods as well as wood-based materials such as MDF and plywood. Thanks to the upcut spiral flute, the chips are...
€32.13
incl. VAT plus shipping costs
Article No. 721431K
Shaper Up-Spiral O-flute Router Bit 5 x 20 mm
This roughing bit provides huge improvements to machining time, bit wear, and overall efficiency in all your profile cutting operations in deeper material. Make single passes up to 20 mm in even dense hardwood with confidence. An 8 mm...
€58.31
incl. VAT plus shipping costs
Article No. 721445K
Shaper Up-Spiral O-flute Router Bit ¼ x 1½ Inch
With a 1.5 inch (38 mm) cutter length, this carbide bit gives you the freedom to make deep cuts in acrylic glass with accuracy and . The polished o-flute prevents nasty chip build-up that can compromise cut quality and decrease cutter...
€58.31
incl. VAT plus shipping costs
Article No. 721441K
Shaper Up-Spiral Flat Router Bit ¼ x 1 Inch
The ¼ x 1 inch Up-Spiral Bit has similar qualities to those of the 6 mm bit - including a carbide composition and dual flute geometry - with the added benefit of a longer edge life. It also offers a longer overall length and a longer...
€32.13
incl. VAT plus shipping costs
Article No. 721437K
Shaper Up-Spiral O-flute Router Bit ⅛ x ½ Inch
An ideal bit for many types of acrylic cutting. The polished flute prevents nasty chip build-up that can compromise cut quality and decrease cutter longevity. Special cutter geometry for both acrylics and non-ferrous metals. Great for...
€45.22
incl. VAT plus shipping costs
Article No. 721440K
Shaper Up-Spiral O-flute Router Bit ⅛ x ¼ Inch
The ⅛ inch (3.175 mm) polished O-flute bit is a great go-to bit for making shallow cuts in a wide variety of acrylics and non-ferrous metals. The polished flute prevents nasty chip build-up that can compromise cut quality and decrease...
€38.08
incl. VAT plus shipping costs
Article No. 721438K
Shaper Up-spiral Flat Router Bit 8 x 35 mm
Three flutes provide cutting advantages in a wide range of materials, from foam to hardwood. Increased pass depth makes Origin projects more efficient without compromising on cut quality or stability. The shank has depth marks for exact...
€113.05
incl. VAT plus shipping costs
Article No. 721446K
Shaper Clearing Router Bit 16 x 16 mm
This clearing bit will change the way you work with Origin. Its 16 mm diameter will make quick, clean work of all your pocketing operations, and make Origin an efficient tool for a wide range of projects. The three-flute geometry enables...
€189.21
incl. VAT plus shipping costs
Article No. 721447K
Shaper Collet Kit
Shaper's complete collet kit includes all basic collet increments in imperial and metric measurements up to ¼ inch (6.35 mm) and 8 mm, respectively. Every project starts with the right cutter and a collet that's designed to accommodate...
€208.25
incl. VAT plus shipping costs
Article No. 721435K
Shaper Collet With Nut ⅛ Inch (3.175 mm)
The ⅛ inch (3.175 mm) collet is a must-have accessory for anyone who is planning to use Origin on fine detail and finish work. it lets you create detailed engravings, inlaid work and precision work with speciality cutters. Advantages:...
€51.17
incl. VAT plus shipping costs
Article No. 721429K
Shaper Collet with Nut ¼ Inch (6.35 mm)
The ¼ inch collet (6.35 mm) is made for a lot of Shaper specialty router bits with ¼ inch shank, such as the ⅛ x ¼ inch and ⅛ x ½ inch up-spiral O-flute router bits (Nos. 721438K , 721440K ), the 11º tapered ball nose router bit (No....
€51.17
incl. VAT plus shipping costs
Article No. 721448K
Shaper MINI Systainer
Sized midway between the Micro SYS and the SYS 1, the Shaper MINI SYS is the just-right form factor for tool, component, and accessory storage and organisation. This is the Systainer Shaper uses to ship and transport all Plate...
€38.08
incl. VAT plus shipping costs
Article No. 721451K
Shaper Brass Barbells
Shaper barbell inlays add style to your solid-wood projects while preventing the spread of cracks. Free, ready-to-cut templates for this product are available on the ShaperHub Hardware Catalogue. Install inlays after finishing, using a...
€58.31
incl. VAT plus shipping costs
Article No. 721453K
Shaper Tapered Ball Nose Router Bit 11°
The 11° Tapered Ball Nose Bit can handle a wide range of specialty applications, from deep profile contouring to cutting wedged tenons for custom joinery. The ball nose end leaves a smooth rounded channel finish, while the four-flute...
€58.31
incl. VAT plus shipping costs
Article No. 721442K
Shaper Double-Sided Tape
Secure your work with the same double-sided tape that we use at Shaper HQ! Save yourself the headache of cleaning up tape residue with this strong-bonding, reliable fixing solution for a wide variety of materials. You can even combine...
€23.80
incl. VAT plus shipping costs
Article No. 721450K
Shaper Up-Spiral Ball Nose Router Bit ¼ x ¾ Inch
The ¼ x ¾ inch Up-Spiral Ball Nose Router Bit cuts smooth channels that are ideal for a wide range of applications, from cutting-board juice channels to lettering on signage. With a solid carbide composition and upcut geometry, this bit...
€35.70
incl. VAT plus shipping costs
Article No. 721439K
Shaper Engraving Router Bit 90°, Shank Ø 6.35 mm
This 90° carbide engraving bit adds versatility to your engraving projects when combined with the standard 60° engraving bit that ships with Origin. In addition to engraving a wide variety of materials including hardwoods, acrylics, and...
€29.75
incl. VAT plus shipping costs
Article No. 721436K
Shaper Engraving Router Bit 60°
The engraving router bit has a 60° cutting angle, perfect for v-cuts. The solid carbide router bit is perfect for engraving a variety of materials including any wood type, plastic, and selected non-ferrous metals. Solid carbide...
€32.13
incl. VAT plus shipping costs
Article No. 721432K
Shaper Essential Bit Kit
Keep your go-to bits close at hand with the Essential Bit Kit, a convenient way to store and transport the three standard cutters that are included with Origin. The custom foam insert protects your cutters from incidental damage and the...
€113.05
incl. VAT plus shipping costs
Article No. 721434K
Shaper Connected Callipers
Send measurements to Origin or other Bluetooth devices at the click of a button./b>Accurate measurement is the basis for every successful project. The wireless calliper sends precise measurements to Origin and thus helps avoid...
€202.30
incl. VAT plus shipping costs
Article No. 721494K
Shaper Edge Fence
Expand the functionality of Shaper Plate specifically for edge processing. Shaper Plate makes the recessing of fittings and recurring milling jobs more efficient than ever before. With this edge stop, Shaper Plate can be used even more...
€117.81
incl. VAT plus shipping costs
Article No. 721495K