Axminster Carrier For C Jaws, #2 MT
Morse taper shank fits Axminster Type C Dovetail Jaws (No. 702246 ). This adapter will save you time-consuming changes from chuck to driver or other accessories with a #2 MT shank. Simply clamp the morse taper shank with the jaws and...
€30.90
incl. VAT plus shipping costs
Article No. 731708
Axminster Lathe Alignment Tool #2 MT/#2 MT
When resetting a rotating headstock without an exact stop or engagement on the lathe bed, e.g. to turn between centres again, the double morse taper can be used to align headstock and tailstock. For lathes with #2 MT mandrels in...
€25.10
incl. VAT plus shipping costs
Article No. 731710
Axminster Mounting Plate for Tool Posts, 75 mm
The 75 mm diameter mounting plate is screwed directly onto post No. 707882 instead of the tool rest. The mounting plate enables you to decorate, carve or drill workpieces directly on the lathe. Concentric grooves in the plate make it...
€39.90
incl. VAT plus shipping costs
Article No. 745287
Pen Making Starter Kit
This starter kit contains the basic tools needed to create pens, including materials for five twist ballpoint pens.
€77.00
incl. VAT plus shipping costs
Article No. 731505
Pen Making Starter Kit II
This starter kit contains the basic tools needed to create pens, including materials for five twist ballpoint pens.
€109.00
incl. VAT plus shipping costs
Article No. 721246
Pen Turning Set, #2 MT
Starter set for making ballpoint pens, neatly and practically stored in a plastic case. Includes the most important tools and utensils for turning writing utensils.
€107.50
incl. VAT plus shipping costs
Article No. 731573
Pen Turning Mandrel for Pens, #2 MT
Pen turning mandrel with sliding clamping shaft for manufacturing pens and smaller turning projects. Precision-made with good true running accuracy Sunken grub screw for reduced risk of injury Collet fits rod diameter 6.2 mm, working...
€41.70
incl. VAT plus shipping costs
Article No. 731510
Mandrel Support, #2 MT
The mandrel support is a recommended connecting element between the mandrel and tailstock quill. It ensures that the mandrel is guided in a pressure-free and exact manner. Improves true running accuracy and protects against damage....
€37.50
incl. VAT plus shipping costs
Article No. 731511
Finial Mandrel Kit, #2 MT
The Finial Mandrel provides pressure-free support for the fine end of a turned piece while the rest of it is being turned. The set includes three interchangeable nylon inserts in sizes 3 mm, 4.5 mm and 6 mm, which fit into the inner ring...
€46.90
incl. VAT plus shipping costs
Article No. 731518
Quick-Release Chucks ECO with Morse Taper DIN 238
Good value for money. Quick-release chuck for craft and hobby use. For use on lathes, routers and vertical drilling machines. Self-tightening and high-force clamping. No chuck key, tighten and release effortlessly by hand. Jaw opening...
€43.50
incl. VAT plus shipping costs
Article No. 705658
Axminster Wall-mounted Tool Holder for #2 MT Accessories
With the lacquered wall-mounted tool holder for #2 MT accessories, which can be fixed to the wall using three screws (not included), up to six accessories with a #2 MT morse taper can be stored within easy reach.
€24.10
incl. VAT plus shipping costs
Article No. 730840
Axminster Twist & Fix Adaptor and Mop Arbour, M33 x 3.5
The Twist & Fix polishing wheel arbour instantly transforms any lathe with an M33 x 3.5 mm spindle thread into a polishing machine. The two-piece polishing wheel holder consists of an adapter that is screwed onto the spindle of the...
€79.00
incl. VAT plus shipping costs
Article No. 731728