Repair Holder, Violin, Viola
Aluminium framework mounted on an acrylic glass base, 28 x 35 cm. Lower bout clamp. Max. opening of body clamp 250 mm.
€143.00
incl. VAT plus shipping costs
Article No. 707010
Shaping Moulds for Tops and Backs
Traditional tool for simplify the work on the top and back. Heavy plywood base, 5 adjustable screws to hold the plate.
€54.00
incl. VAT plus shipping costs
Article No. 703931
Bow Rehairing Device
Traditional device for safe holding the bow during rehairing process. In length-adjustable tip holder, all holding devices cork padded for secure operation.
€104.00
incl. VAT plus shipping costs
Article No. 703933
Herdim Fretboard Guards, Guitar, 3-Piece Set
Supposed to be placed over fret which is being shaped, to work without worry of fretboard damage. The rubber band holds the guard in position, the rubber band being placed in the way, it does not interfere with the tools in use. Set of 3...
€9.50
incl. VAT plus shipping costs
Article No. 717098
Herdim Understring Radius Gauges, Guitar, 8-Piece Set
Indispensable when setting and adjusting the magnets of the pickups. The gauge, only 3 mm high at the measuring base, can be slipped under the strings without their removal. The spokes have identical radius on the top and bottom, so the...
€33.10
incl. VAT plus shipping costs
Article No. 717089
Herdim Radius Gauges, Notched, Guitar, 4-Piece Set
The gauge tailored for quick and accurate measurement of the fretboard base radius, without necessary removal of the strings. Laser cut from 1 mm stainless steel, the set of 4 gauges can measure radii 7.25", 9.5", 10", 12", 14", 15", 16"...
€34.70
incl. VAT plus shipping costs
Article No. 717087
Herdim Radius Gauges, Guitar, 2-Piece Set
Traditional templates for measuring of the curvature of the fretboard. Set of two covers radii 7.25", 9.5", 10", 12", 14", 15", 16" and 20". Laser cut from 1 mm stainless steel.
€20.90
incl. VAT plus shipping costs
Article No. 717088
Sintoms Fret Bender
Precisely pre-bent frets ease fretting and re-fretting, and help to maintain the job with an unmatchable accuracy. Heavy duty device, adjustable bending radius. Can be mounted on the workbench.
€129.00
Article No. 707030
Fretting Rulers, Guitar
Precise rulers for marking of fret positions on a guitar fretboard. After cutting a groove for the nut fret, the ruler is secured in the position and marks for frets are made in the precisely cut notches on both sides of the ruler....
€21.30
incl. VAT plus shipping costs
Article No. 707020
Diamond Honing Plates
Double-sided mini diamond plates for whetting, polishing and honing. Compact, light and flexible. For chamfering fret ends and levelling frets, especially on small plucked instruments, such as mandolins and ukuleles. 100 x 30 x 1 mm
€16.30
incl. VAT plus shipping costs
Article No. 704953
Fretboard Straight Edge, Notched, Guitar
Steel ruler with precisely milled and sanded notched ruler edge for guitar fretboard straightness detection. Long and short scale notch pattern covers majority of fretting patterns.
€40.60
incl. VAT plus shipping costs
Article No. 707014
Fretboard Straight Edge, Guitar
Steel ruler with precisely milled and sanded ruler edge for guitar fret and fretboard straightness detection.
€35.60
incl. VAT plus shipping costs
Article No. 707013