€9.90
incl. VAT plus shipping costs
Article No. 707161
Measuring Tape
White steel measuring tape with self-adhesive tape on the back for affixing to machines, workbenches, worktops etc. Millimetre scale along top and bottom edge, centimetres in black, decimetres in red. Length 100 cm, width 10 mm,...
€8.80
incl. VAT plus shipping costs
Article No. 707476
Digital Plane Blade Set Up Gauge
For adjusting the cutting depth of plane blades. Magnetic surface, high accuracy of 0.01 mm.
€14.60
incl. VAT plus shipping costs
Article No. 714184
Starrett Outside Micrometer 436.1
The 436.1 is the most popular outside micrometer from Starrett, which manufactures the largest range of these precision tools in the world. In contrast to many other outside micrometers on the market, which differ very little in design,...
€92.30
incl. VAT plus shipping costs
Article No. 718504
Digital Calliper
Multi-purpose calliper with a large five-digit LCD display for inside, outside and depth measurement. Display can be switched between millimetre and inch. Resolution of 0.01 mm. Display can be zeroed at any position. Stainless steel...
€38.40
incl. VAT plus shipping costs
Article No. 707258
Dial Calliper
A sturdy dial calliper with a shock- and dust-proof analogue dial indicator, ideal for workshop use. Stainless steel slide and dial, with hardened faces, two screws for locking the slide and calibration ring in place; display accuracy...
€49.90
incl. VAT plus shipping costs
Article No. 707259
Shinwa Plastic Dial Calliper
Extra-light and durable GRP dial calliper which is gentle on the workpiece. Recommended for mobile use and for measuring sensitive parts, e.g. in restoration work. External, internal and depth measurements. 0.1 mm display accuracy, with...
€29.40
incl. VAT plus shipping costs
Article No. 707225
Analogue Calliper
Bevelled scale in mm and inch for parallax-free reading. Deep-etched stainless steel, slide with 0.05 mm vernier and locking screw.
€28.80
incl. VAT plus shipping costs
Article No. 707303
Wiha digiMax Digital Calliper
Swiss-precision digital calliper of high-tech fibre-glass material for all inside, outside and depth measurements. The anti-magnetic material mix does not attract any metal cuttings, which increases measuring accuracy and, thanks to the...
€85.90
incl. VAT plus shipping costs
Article No. 717877
Veritas Metric Set-Up Blocks, 9-Piece Set
Ideal for adjusting spaces, e.g. between parallel fences or depths, e.g. when working with circular saws, routers, table routers or drills. Combined with the steel block, the eight different set-up blocks, which are accurate within 0.05...
€59.50
incl. VAT plus shipping costs
Article No. 703854
Starrett Calliper
This Starrett precision calliper is characterised by its very high accuracy of ± 0.02 mm. The scale is anti-reflective and deep-etched with mm and inch. Stainless steel slider with 0.02 mm vernier and locking screw. Delivered in storage...
€45.90
incl. VAT plus shipping costs
Article No. 718858
Calliper in Card Format
Extra-thin stainless steel calliper in credit card format for on-the-go. Fits in any wallet or jacket pocket and is always to hand. Deep-etched scale with 0.05 mm vernier. A copy of this tool has been added to the collection of the...
€16.90
incl. VAT plus shipping costs
Article No. 718067
Shinwa Mini Protractor
Also for measuring bevel angles when sharpening tool blades. With scale markings.
€13.90
incl. VAT plus shipping costs
Article No. 717141
Shinwa Precision Protractor, Scale Width 90 mm
With precise angle markings, running in both directions (0°-180°). Stainless steel. Chrome-plated, matt surface with deep-etched scale. Shaft with a scale with millimetre graduation on one side.
€15.70
incl. VAT plus shipping costs
Article No. 730861
Shinwa Precision Protractor with Millimetre Scale, Scale Width...
Precision protractor with accurate angle markings, with scale running in both directions (0°-180°). The eccentrically positioned knurled screw ensures reliable fixing of the set angle. The blade has a millimetre scale on one side for...
€49.00
incl. VAT plus shipping costs
Article No. 730909
Shinwa Precision Protractor, Scale Width 120 mm
With precise angle markings, running in both directions (0°-180°), stainless steel.
€34.00
incl. VAT plus shipping costs
Article No. 717140
Bridge City UG-1 Universal Gauge
This all-rounder has a try square, protractor, sliding bevel, altimeter or depth gauge, marking gauge, centre marker, inch/centimetre table or dovetail gauge (6:1, 8:1) - all combined in one tool. Ideal companion for scribing work on the...
€169.00
incl. VAT plus shipping costs
Article No. 728971
Angolfast Protractor
Universal protractor made of anodised aluminium for measuring and transmitting angles from 20° to 135°. Easy-to-read graduation thanks to red, deeply etched scale. The incorporated vial allows the horizontal level to be quickly...
€99.00
incl. VAT plus shipping costs
Article No. 715453
Winkelprofi
Mitre guide for measuring any external or internal angle and transferring it directly to the workpiece or saw. With angle and bisectrix markings for perfect mitre cuts. Folds to the width of steel rule. Stainless spring steel. Scale...
€36.70
incl. VAT plus shipping costs
Article No. 707929
Hattori Precision Protractor
Removable fence made of anodised aluminium Scale with 0.5° graduation and round marking holes Marking slots for a pencil with 1° and 5° graduation, as well as at 22.5° and 67.5° Vertical scale ± 80 mm Supplied with 0.5 mm mechanical...
€32.90
incl. VAT plus shipping costs
Article No. 714647
Carpenter’s Square, Walnut
Walnut with brass fitting. Spring steel blade. Accuracy 0.1 mm per 100 mm.
€29.90
incl. VAT plus shipping costs
Article No. 731770
Engineers Triangle 200PCB
The »Engineers Triangle« is an exceptional marking tool that makes marking dimensions and angles much easier. The use of FR4 PCB material for the tool blade and the precise processes from PCB manufacturing creates a measuring and...
€59.00
incl. VAT plus shipping costs
Article No. 745270
Woodpeckers Precision Square 90°, Model 641
This precision square from Woodpeckers is made of ultra-sturdy aluminium and is therefore extremely robust. Due to the special manufacturing process, it is accurate to 0.01 mm per 100 mm. Thanks to the double handle on both sides, the...
€109.00
incl. VAT plus shipping costs
Article No. 718456
Woodpeckers Precision Square 90°, Model 851
This precision square from Woodpeckers is made of ultra-sturdy aluminium and is therefore extremely robust. Due to the special manufacturing process, it is accurate to 0.01 mm per 100 mm. Thanks to the double handle on both sides, the...
€139.00
incl. VAT plus shipping costs
Article No. 718457
Woodpeckers Precision Square 90°, Model 1281
This precision square from Woodpeckers is made of ultra-sturdy aluminium and is therefore extremely robust. Due to the special manufacturing process, it is accurate to 0.01 mm per 100 mm. Thanks to the double handle on both sides, the...
€159.00
incl. VAT plus shipping costs
Article No. 718446
Woodpeckers Precision Square 90°, Model 1812
This precision square from Woodpeckers is made of ultra-sturdy aluminium and is therefore extremely robust. Due to the special manufacturing process, it is accurate to 0.01 mm per 100 mm. Thanks to the double handle on both sides, the...
€289.00
incl. VAT plus shipping costs
Article No. 718471
Woodpeckers Precision Square 90°, Model 2616
This precision square from Woodpeckers is made of ultra-sturdy aluminium and is therefore extremely robust. Due to the special manufacturing process, it is accurate to 0.01 mm per 100 mm. Thanks to the double handle on both sides, the...
€379.00
incl. VAT plus shipping costs
Article No. 718470
Veritas Dovetail Marker
Precision tools for marking dovetails. Aluminium, black anodised, extra-long stock, relieved inside corner.
€16.60
incl. VAT plus shipping costs
Article No. 703654
Dovetail Gauge
For marking straight and angled dovetail joints, 1:8 ratio. Adjustable width (6-40 mm) and angle, stainless steel. Blade and guide length 150 mm.
€24.90
incl. VAT plus shipping costs
Article No. 707179
Solid Steel Try Square
Small try square made from tool steel (not rustproof). Accuracy 0.08 mm per 100 mm.
€18.80
incl. VAT plus shipping costs
Article No. 707245
Japanese Mini Try Squares
Small Japanese try square with stainless steel blade and brass stock, ground. Accuracy 0.1 mm per 100 mm.
€12.00
incl. VAT plus shipping costs
Article No. 717120
Shinwa Try Square
Precision square with millimetre scale on both sides, inner and outer dimensions. Stock decorated with Japanese motives. Stainless steel. Accuracy 0.1 mm per 100 mm.
€19.90
incl. VAT plus shipping costs
Article No. 717115
Shinwa Aluminium Try Square without Scale
Precision square with wide stop and low weight. Stock made of aluminium, stainless steel blade. Accuracy 0.1 mm per 100 mm. Without scale.
€23.50
incl. VAT plus shipping costs
Article No. 730539
Shinwa Mitre Square
Stainless steel square for marking 45° and 90° angles with deep-etched millimetre scale. Cutouts in the square allow marking of opposite angles or parallel translation. Precision-ground fence and edges.
€24.80
incl. VAT plus shipping costs
Article No. 717147
Shinwa 3-D Mitre Squares
Can be used for marking 45° and 90° mitres on battens or counterbattens. This saves time and increases precision in making mitre joints or cross cuts. Cutouts in the square allow marking of opposite angles or parallel translation. Made...
€19.90
incl. VAT plus shipping costs
Article No. 717122
Shinwa »Ornament« Mitre Square
Stainless steel mitre square (45°) with deep-etched Japanese ornamentation. Cutouts in the square allow parallel translation. Precision-ground fence and edges. Without scale.
€13.90
incl. VAT plus shipping costs
Article No. 717131
Shinwa Square »Sashigane«, Flexible
This light and easy-to-read stainless steel square is used not only as a framing square and scale, but also as an angle of inclination and try square. The blade is 15 mm wide, the standard measurement in Japan for tenons and board...
€49.90
incl. VAT plus shipping costs
Article No. 717130
Shinwa Square »Sashigane«, 300 mm, Rigid
This light and easy-to-read stainless steel square is used not only as a framing square and scale, but also as an angle of inclination and try square. The blade is 15 mm wide, the standard measurement in Japan for tenons and board...
€54.00
incl. VAT plus shipping costs
Article No. 717132
Shinwa Carpenter's Square
Precise stainless steel square with inside and outside millimetre scale. Deeply etched scale, front and back identical. Accuracy 0.1 mm per 100 mm.
€29.90
incl. VAT plus shipping costs
Article No. 717133
Shinwa Small Carpenter's Square, Standard, incl. Metal Stopper
Rigid stainless steel square with metal stopper in a set for checking the squareness of squared timber and for scribing joints. Stainless steel square with depth-etched mm outer scale and separate inner scale. Drilled inner corner for...
€58.50
incl. VAT plus shipping costs
Article No. 730908
Shinwa Small Carpenter's Square
Rigid stainless steel square for marking fittings and to quickly judge whether squared timber is perpendicular. Deep-etched outer scale and a separate inner scale. Drilled inner corner for precise positioning. Accuracy 0.1 mm per 100 mm.
€22.90
incl. VAT plus shipping costs
Article No. 717328
Shinwa Mini Square
Stainless steel mini square, good value for money. For checking edges or rabbets of small workpieces. Deep-etched scale on both sides, rounded front edges. Accuracy 0.1 mm per 100 mm.
€8.60
incl. VAT plus shipping costs
Article No. 730860
German Carpenter's Square
The standard square for every carpenter is made of rustproof spring steel and has a seamless cut. An etched scale on both sides of the square can be used for external and internal measuring. The holes, spaced 5 mm apart, on the short...
€25.90
incl. VAT plus shipping costs
Article No. 707279
Veritas Sliding Square
The carefully conceived sliding square proves to be the ideal aid for scribing hinges, fittings and mortise joints. The stainless steel plate is graduated along three sides. The right side of the blade can be inscribed by users due to...
€42.50
incl. VAT plus shipping costs
Article No. 703647
Alpha Marking Tool
The alpha square is an advanced version of the carpenter's square and an indispensible marking tool for all carpenters. You can set this tool to any additional degrees you may require between 0° and 90° and mark them or read them off on...
€49.00
incl. VAT plus shipping costs
Article No. 710508
Nobex OCTO Folding Squares
This Swedish try square features seven angle positions (22.5°, 45°, 67.5°, 90°, 112.5°, 135° and 157.5°) and high accuracy. The hardened stainless steel blade latches into the pressured ball bearing without free play and the try square...
€29.80
incl. VAT plus shipping costs
Article No. 707297
Hultafors Folding Square Quattro 25
Unbeatable positioning accuracy thanks to four stainless steel locking pins. You can set the folding square to three positions (45°, 90° and 135°) with zero backlash. It can also be folded up for storage and fits in any toolbag. Hardened...
€39.90
incl. VAT plus shipping costs
Article No. 707313
Starrett Compact Combination Square
A small precision square, ideal for scribing and as a precision rule for planed wood workpieces. Slidable, hardened steel rule (not rustproof) and 45°/90° square head. The deep-etched scale ensures excellent and lasting readability....
€89.00
incl. VAT plus shipping costs
Article No. 718303