Sonstige
Products from Sonstige
Buy Sonstige products online at DICTUM.
»BohrStopp« Drill Depth Stop
One depth stop for several drill diameters. The drill is clamped evenly in a collet-like system that is similar to a jaw chuck. This prevents damage to the secondary cutting edges on the drill. Like a quick-action chuck, the drill stop...
€14.90
incl. VAT plus shipping costs
Article No. 720001
Sliding Rail, 300 mm
Adjustable sliding rail with square cross-section (19 x 9.5 mm) for guiding in T-tracks (e.g. Nos. 714672 , 714673 ). The 300 mm long rail contains four M6 threads for fastening stops, auxiliary devices, etc. The play between the sliding...
€12.90
incl. VAT plus shipping costs
Article No. 714671
Slot Nut M8, 2 Pieces
Versatile slot nut made of aluminium with 45 mm length. Ideal for making auxiliary and clamping devices combined with guide rails. One threaded hole M8 with brass pressure screw for fixing the slot nut in guide rails for example and one...
€6.50
incl. VAT plus shipping costs
Article No. 714668
Slot Nut 200 mm, M6/M8
Slot nut with 200 mm length for constructing auxiliary and clamping devices combined with guide rails. The long slot nut is also suitable as a glide, e.g. for cross or angle fences on machine tables. The four M6 and three M8 internal...
€8.90
incl. VAT plus shipping costs
Article No. 714670
Guide Rail
The wide T-tracks form the base for sliding clamping devices or stops. With the matching slot nuts No. 714668 or No. 714670 , workpieces can be clamped and fixed securely and quickly on worktops. Track cross-section Outer dimensions 30 x...
€12.90
incl. VAT plus shipping costs
Article No. 714672
Magnetic Wristband
Ideal for demanding assembly work . Strong magnets built into the wristband hold screws, nails, drills, bits and small tools ready to hand on the wrist . A small pocket holds non-magnetic parts. Practical hook-and-loop closure for easy...
€9.80
incl. VAT plus shipping costs
Article No. 708939
Anvil Horn
Anvil horn for use with a standard anvil with square hardy hole 25 x 25 mm. The anvil horn is used to make eyelets, eyes, rings, bends and various flourishes. Diameter at the bottom of the horn: 50 mm; Height of the conical horn: 150 mm;...
€49.90
incl. VAT plus shipping costs
Article No. 745232
Riveting Hammer, Lower Part, 50 x 50 mm
Straight anvil insert for forging attachments such as knife tangs. The lower part of the riveting hammer enables very precise work. Depending on the shape of the riveting hammer surface, different workpiece shapes can be achieved. The...
€59.00
incl. VAT plus shipping costs
Article No. 745237
Anvil Hardy
The hardy is used to remove excess material from the red-hot workpiece. For use with a standard anvil with square hardy hole 25 x 25 mm. Edge width: 50 mm; Total height: 150 mm.
€49.90
incl. VAT plus shipping costs
Article No. 745233
Planishing Hammer, Upper Part, 70 x 70 mm, Ash Handle
In blacksmithing or art forging, the original rough shape of the workpiece is often subsequently reworked in a red-hot state to eliminate unwanted structural irregularities. The planishing hammer is used to smooth the forged surfaces and...
€89.90
incl. VAT plus shipping costs
Article No. 745234
Planishing Hammer, Lower Part, 70 x 70 mm
In blacksmithing or art forging, the original rough shape of the workpiece is often subsequently reworked in a red-hot state to eliminate unwanted structural irregularities. The planishing hammer is used to smooth the forged surfaces and...
€69.90
incl. VAT plus shipping costs
Article No. 745235
Riveting Hammer, Upper Part, 50 x 50 mm, Ash Handle
Straight riveting hammer for forging attachments such as knife tangs. The riveting hammer enables very precise work. Depending on the shape of the riveting hammer face and its lower part, different workpiece shapes can be achieved....
€89.00
incl. VAT plus shipping costs
Article No. 745236