Shapton

Products from Shapton

The Japanese sharpening stone manufacturer Shapton® from Nabatame, Tochigi Province, produces probably the hardest Japanese water stones. In contrast to almost all other makes, they keep their shape longer and require less frequent dressing.

The premium range from Japanese company Shapton® is the glass-stone series. The sharpening particles are highly pure and homogeneous. This is noticeable when changing to finer grits: The traces from the previous grit are quickly ground out. A special bond allows quick sharpening on a flat surface. The sharpening stone has a base of tempered glass and is thus 100 % warp-free. Conventional sharpening stones may warp microscopically by absorbing water, but Shapton® stones solve this problem with their extremely flat base of tempered glass. Another advantage of the glass base is that the grit rating on the underside is always visible even after much use. Before use, spray the stones with water. It is not recommended to keep them in water permanently. White aluminium oxide abrasive.

1 of 2
Shapton Glass Stone HR Shaping Stone, Hard Bond, Grit 120

Shapton Glass Stone HR Shaping Stone, Hard Bond, Grit 120

The hard bond is preferable for high-alloy tool steels . Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
variants
€29.00

incl. VAT plus shipping costs

Article No. 711630

Shapton »Seven« HR Glass Stone Shaping Stone, Grit 500 (25 Microns)

Shapton »Seven« HR Glass Stone Shaping Stone, Grit 500 (25...

Compact stone with stone properties specially developed for kitchen knives.
€25.00

incl. VAT plus shipping costs

Article No. 711625

Shapton Glass Stone HR Shaping Stone, Thick Version, Hard Bond, Grit 500

Shapton Glass Stone HR Shaping Stone, Thick Version, Hard...

This shaping stone is thicker than the standard version with a longer service life. Comes with plastic case.
€69.00

incl. VAT plus shipping costs

Article No. 711623

Shapton Glass Stone HC Honing Stone, Soft Bond, Grit 4000

Shapton Glass Stone HC Honing Stone, Soft Bond, Grit 4000

These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel).
variants
€49.00

incl. VAT plus shipping costs

Article No. 711605

Shapton Glass Stone »Seven« HR, Set

Shapton Glass Stone »Seven« HR, Set

According to the credo »the beauty of the usefulness«, Shapton has again managed to combine the subject of sharpening and the fascination of sharp blades into a natural unit. Plus, the simple, almost artistic product becomes a design...
€269.00

incl. VAT plus shipping costs

Article No. 711624

Shapton Glass Stone »Seven« Trueing Block with Diamond Coating

Shapton Glass Stone »Seven« Trueing Block with Diamond Coating

For extremely precise, absolutely flat trueing. Designed to accommodate all sharpening stones of the Glass Stone »Seven« series. Accuracy of flatness ± 0.005 mm. Grit approx. 240 (54 micron).
€133.00

incl. VAT plus shipping costs

Article No. 711628

Shapton »Seven« HR Glass Stone Sharpening Stone, Grit 1000 (11.5 Microns)

Shapton »Seven« HR Glass Stone Sharpening Stone, Grit 1000...

Compact stone with stone properties specially developed for kitchen knives.
variants
€32.00

incl. VAT plus shipping costs

Article No. 711632

Shapton »Seven« HR Glass Stone Honing Stone, Grit 6000 (2 Microns)

Shapton »Seven« HR Glass Stone Honing Stone, Grit 6000 (2...

Compact stone with stone properties specially developed for kitchen knives.
variants
€39.00

incl. VAT plus shipping costs

Article No. 711635

Shapton Sharpening Base

Shapton Sharpening Base

The large glass support is warp-free and is framed by a high-quality, soft plastic edge, that preserves sharp tool and knife blades as well as the edges of sharpening stones when touching them. Both materials are also easy to clean.
€159.00

incl. VAT plus shipping costs

Article No. 711614

Shapton Professional Sharpening Stone Holder

Shapton Professional Sharpening Stone Holder

Solid sharpening stone holder, of hard rubber with tempered glass core for secure positioning. Fits Shapton sharpening stones.
€88.00

incl. VAT plus shipping costs

Article No. 711611

1 of 2