Pfeil

Products from Pfeil

Pfeil

The production of Pfeil® knives is based on an old artisan tradition. The company was founded in 1902 in Langenthal as a knife smithy. Production of the first carving tools was started in around 1942. The high quality of the tools soon led to great popularity with professional carvers, but also with hobby carvers and schools both at home and abroad.

With over 700 forms and sweeps, Pfeil offers the largest and most variable product range. The products of the worlds leading manufacture of fine carving tools are made from specially alloyed, hard tool steel, forged and ground on precision machines, heat-treated in an electric furnace and sharpened by hand ready-for-use. The blades are uniformly hardened to 59-61 HRC along their entire length, the break-proof oiled ash handles are mounted with inner ferrules. Only indigenous woods and solvent-free oils are used.
Your advantage:

  • Quick delivery straight from stock
  • Lifetime warranty on material and workmanship! (Damage caused by improper use is not covered by this warranty)
4 of 4
Pfeil Half Moon Knife, Blade Width 125 mm

Pfeil Half Moon Knives

The traditional saddler's knife with a wide, semicircular blade allows the knife to be guided at a right angle even when cutting thick leather. Long, exact cuts are made with the middle of the blade, tight radii with the tips. Also used...
variants
 
€129.00

incl. VAT plus shipping costs

Article No. 701366

Pfeil Paring Chisel, 6 mm

Pfeil Paring Chisels

These perfectly shaped paring chisels of chromium-vanadium steel, hardened to approximately 60 HRC, are ideal for finishing wood joints. With its oval shape, the octagonal oiled elm wood handle provides a comfortable, non-slip grip. Its...
variants
 
€26.70

incl. VAT plus shipping costs

Article No. 730058

Pfeil Paring Chisel, 12 mm

Pfeil Paring Chisels

These perfectly shaped paring chisels of chromium-vanadium steel, hardened to approximately 60 HRC, are ideal for finishing wood joints. With its oval shape, the octagonal oiled elm wood handle provides a comfortable, non-slip grip. Its...
variants
 
€27.60

incl. VAT plus shipping costs

Article No. 730060

Pfeil Paring Chisel, 20 mm

Pfeil Paring Chisels

These perfectly shaped paring chisels of chromium-vanadium steel, hardened to approximately 60 HRC, are ideal for finishing wood joints. With its oval shape, the octagonal oiled elm wood handle provides a comfortable, non-slip grip. Its...
variants
 
€30.90

incl. VAT plus shipping costs

Article No. 730062

Pfeil Paring Chisels, 6-Piece Set, in Cotton Tool Roll

Pfeil Paring Chisels

These perfectly shaped paring chisels of chromium-vanadium steel, hardened to approximately 60 HRC, are ideal for finishing wood joints. With its oval shape, the octagonal oiled elm wood handle provides a comfortable, non-slip grip. Its...
variants
 
€164.00

incl. VAT plus shipping costs

Article No. 730069

Pfeil Paring Chisels, 6-Piece Set, in »Schwingerhosen-yarn« Linen Tool Roll

Pfeil Paring Chisels

These perfectly shaped paring chisels of chromium-vanadium steel, hardened to approximately 60 HRC, are ideal for finishing wood joints. With its oval shape, the octagonal oiled elm wood handle provides a comfortable, non-slip grip. Its...
variants
 
€219.00

incl. VAT plus shipping costs

Article No. 730030

Pfeil Paring Chisel, 10 mm

Pfeil Paring Chisels

These perfectly shaped paring chisels of chromium-vanadium steel, hardened to approximately 60 HRC, are ideal for finishing wood joints. With its oval shape, the octagonal oiled elm wood handle provides a comfortable, non-slip grip. Its...
variants
 
€27.60

incl. VAT plus shipping costs

Article No. 730059

Pfeil Paring Chisel, 16 mm

Pfeil Paring Chisels

These perfectly shaped paring chisels of chromium-vanadium steel, hardened to approximately 60 HRC, are ideal for finishing wood joints. With its oval shape, the octagonal oiled elm wood handle provides a comfortable, non-slip grip. Its...
variants
 
€30.90

incl. VAT plus shipping costs

Article No. 730061

Pfeil Paring Chisel, 26 mm

Pfeil Paring Chisels

These perfectly shaped paring chisels of chromium-vanadium steel, hardened to approximately 60 HRC, are ideal for finishing wood joints. With its oval shape, the octagonal oiled elm wood handle provides a comfortable, non-slip grip. Its...
variants
 
€34.30

incl. VAT plus shipping costs

Article No. 730063

Empty Tool Roll, 8 Pockets

Empty Tool Roll

Protect your tools with these tool rolls made of indestructible »Schwingerhosen-yarn« linen. The robust »Schwingerhose« is as much admired in Switzerland as the »Lederhose« (traditional Bavarian leather trousers) in Germany. The inside...
variants
€60.60

incl. VAT plus shipping costs

Article No. 730024

Pfeil Carving Knife, HSS, Blade Length 50 mm

Pfeil Carving Knives, HSS

The HSS used for the blades of this carving knife is hardened to 62 HRC and ensures a long service life and stability. The straight blade is ideal for chip carving, reliefs and ornamentation. Ash handle.
variants
 
€28.70

incl. VAT plus shipping costs

Article No. 730067

Pfeil Burnisher, Three-square

Pfeil Burnisher, Three-square

Scraper burnisher made from hardened tool steel (62 HRC) with triangular cross-section for high burnishing pressure. The surface is finely polished for a smooth drawing movement and thus an even burr. A brass ferrule joins the blade to...
€30.00

incl. VAT plus shipping costs

Article No. 730054

Pfeil Carving Knife, HSS, Blade Length 80 mm

Pfeil Carving Knives, HSS

The HSS used for the blades of this carving knife is hardened to 62 HRC and ensures a long service life and stability. The straight blade is ideal for chip carving, reliefs and ornamentation. Ash handle.
variants
 
€38.70

incl. VAT plus shipping costs

Article No. 730068

€5.50

incl. VAT plus shipping costs

Article No. 800262

variants
€5.50

incl. VAT plus shipping costs

Article No. 800263

Replacement Handles for Pfeil Allongee Gouges and Dräyer Gouges

Replacement Handles for Pfeil Allongee Gouges and Dräyer Gouges

Swiss hornbeam, fitted with top and bottom ferrules.
€13.80

incl. VAT plus shipping costs

Article No. 701609

Replacement Handle for Pfeil Chisels, Blade Width 26-40 mm

Replacement Handles for Pfeil Chisels

Swiss hornbeam, fitted with top and bottom ferrules.
variants
€8.00

incl. VAT plus shipping costs

Article No. 701608

4 of 4