M. Power Tools

Products from M. Power Tools

The M. Power Tools Multifunction Router Base CRB 7 and its accessories extend the functional range of your router many times over.

M. Power Tools DC Diamond File, Fine/Coarse

M. Power Tools DC Diamond File, Fine/Coarse

Handy, thin file with two opposing plates, each with a different grit. Highly versatile, especially suited for saw blades, detail work, shears and knives.
€21.90

incl. VAT plus shipping costs

Article No. 740193

M. Power Tools DC Diamond Sharpening Card with Handle, Fine/Coarse

M. Power Tools DC Diamond Sharpening Card with Handle

Practical hand-held sharpener in credit card format. Includes removable side handle and two opposing plates with different grits. Highly versatile. Magnetic stone holders (No. 740196 ) available as accessory.
€19.90

incl. VAT plus shipping costs

Article No. 740194

M. Power Tools Multifunction Router Base CRB 7 with 7 Functions

M. Power Tools Multifunction Router Base CRB 7 with 7 Functions

The multifunction CRB 7 router base fits the majority of woodworking routers and adds 7 functions to your router: 1. Offset base plate for increased stability and secure guidance in edge moulding 2. Anti-tilt support/leg for working on...
€109.00

incl. VAT plus shipping costs

Article No. 704095

M. Power Tools DC Diamond Router Bit Sharpener, Fine/Coarse

M. Power Tools DC Diamond Router Bit Sharpener

Handy, thin sharpening card with side handle. Two opposing plates, each with a different grit. Designed for sharpening routers, drills and for detail work. Magnetic stone holders (No. 740196 ) available as accessory.
€18.80

incl. VAT plus shipping costs

Article No. 740195

M. Power Tools DC Fasttrack Knife Sharpener

M. Power Tools DC Fasttrack Knife Sharpener

Th DC Fasttrack Knife Sharpener allows quick and uncomplicated sharpening of kitchen knives or cutter knives on site. Small and easy to handle Quick sharpening results Uncomplicated dry sharpening No trueing of the sharpening stones...
€41.90

incl. VAT plus shipping costs

Article No. 740844

M. Power Tools Edging Trim Kit for CRB 7

M. Power Tools Edging Trim Kit for CRB 7

This adapter plate and the multifunction router base CRB 7 (No. 704095 ) will transform your router into a precise edge-trimming router. The adapter plate and corresponding bearing guide are attached underneath the router base. The...
€41.90

incl. VAT plus shipping costs

Article No. 704096

M. Power Tools Parallel Fence for Multifunction Router Base CRB 7

M. Power Tools Parallel Fence for Multifunction Router Base CRB 7

This parallel fence will make your Multifunction Router Base CRB 7 (Article No. 704095 ) even more versatile. Made of highly durable plastic, the parallel fence is screwed to the guide fence of the CRB 7. It enables you to make exact...
€26.90

incl. VAT plus shipping costs

Article No. 704094

M. Power Tools CRB 7 - MHL Parallel Double Fence

M. Power Tools CRB 7 - MHL Parallel Double Fence

Fitting the Multifunction Router Base CRB 7 (No. 704095 ), the double fence extends the area of application of your router to include additional useful functions. The continuously adjustable and the fixed fence are mounted under the CRB...
€76.90

incl. VAT plus shipping costs

Article No. 704239

M. Power Tools Profile Scriber

M. Power Tools Profile Scriber

This tool enables precise scribing of shelves, worktops and flooring through five different tracing wheels. The spring-loaded pencil, contained in the knurled shaft, allows gentle downward pressure and therefore a smooth, even line. Four...
€29.80

incl. VAT plus shipping costs

Article No. 707289

M. Power Tools Point.2.Point

M. Power Tools Point.2.Point

For laying out equal spacings, e.g. dovetails, dowels, etc. Extends to 600 mm and can be locked in any position to transfer up to seven position markings (six equal spacings) to the workpiece. Stainless steel, brass screws. Not suitable...
€31.20

incl. VAT plus shipping costs

Article No. 707267

M. Power Tools Triscribe Marking Heads

M. Power Tools Triscribe Marking Heads

Convert a try square into a precision marking gauge, or a flat ruler (up to 2.5 mm thick) into a practical measuring compass. Two marking heads, hardened needle insert, cutter insert with replacement blade, can also be used with pencil...
€23.90

incl. VAT plus shipping costs

Article No. 707268

M. Power Tools DC Fasttrack MK2 Sharpening System, Set

M. Power Tools DC Fasttrack MK2 Sharpening System

This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming...
€125.90

incl. VAT plus shipping costs

Article No. 740852

M. Power Tools DC Fasttrack De-Burring Plate, Extra-Fine

M. Power Tools DC Fasttrack De-Burring Plate, Extra-Fine

For de-burring the mirror side of chisels after sharpening. Self-adhesive. Fits No. 740851 , 740852 .
€15.50

incl. VAT plus shipping costs

Article No. 740832

M. Power Tools DC Fasttrack Diamond Stone, Extra-Coarse

M. Power Tools DC Fasttrack Diamond Stone

With magnetic insert. Fits No. 740830 . Dimensions abrasive: 77 x 26 x 4.2 mm.
variants
€15.50

incl. VAT plus shipping costs

Article No. 740833

M. Power Tools DC Fasttrack Diamond Stone, Angled by 2.5°, Extra Coarse

M. Power Tools DC Fasttrack Diamond Stone, Angled

Due to the 2.5° angled sharpening surface, the angles 22.5°, 27.5° and 32.5° can also be produced with sharpening system No. 740830 and the angles 17.5° and 22.5° with knife sharpener No. 740844 . With magnetic insert. Fits No. 740830...
variants
€15.50

incl. VAT plus shipping costs

Article No. 740845

M. Power Tools DC Fasttrack Mini Strop

M. Power Tools DC Fasttrack Mini Strop

Mini strop made of genuine leather for honing chisels and plane blades with sharpening system No. 740830 . With the adhesive surface on the underside, you can simply stick the strop to the back of the sharpening system.
€15.50

incl. VAT plus shipping costs

Article No. 740850

M. Power Tools DC Shaping/Sharpening Block, Set, Extra-fine/Coarse

M. Power Tools DC Shaping/Sharpening Block, Set,...

Bench stone with two opposing plates, each with a different grit. Ideal for trueing and for the sharpening of cutting tools. Includes two magnetic, rubber coated stone holders, cleaning block, 30 ml lapping fluid, leather honing strop...
€89.00

incl. VAT plus shipping costs

Article No. 740063

M. Power Tools DC Diamond Stone Lapping Fluid, 100 ml

M. Power Tools DC Diamond Stone Lapping Fluid, 100 ml

The lapping fluid can be used instead of water when working with diamond-coated sharpening systems. The positive properties of the lapping fluid considerably improve the grinding result, reliably prevent rust and corrosion and also have...
€8.50

(Content: €85.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 740856

€11.30 €9.40

incl. VAT plus shipping costs

Article No. 740831