Lie-Nielsen
Products from Lie-Nielsen
Lie-Nielsen Toolworks began in 1981 as an effort to make top-quality hand tools available again from a US manufacturer. Today they produce over 100 types of planes, saws, spokeshaves, chisels, rasps and more. The quality of machining and finishing results in a tool that looks as great as it works, and will be a pleasure to use for years to come.
€39.10
incl. VAT plus shipping costs
Article No. 717188
Lie Nielsen High-Angle Frogs, Blade Width 60 mm
High-angle frog for smoothing difficult wood. Thanks to these replaceable frogs, the cutting angle, which is usually restricted to 45° in bench planes, can be increased to the steeper 50 or 55° angles of the renowned English smoothing...
€89.10
Article No. 717885
Lie-Nielsen High-Angle Frogs, Blade Width 50 mm
High-angle frog for smoothing difficult wood. Thanks to these replaceable frogs, the cutting angle, which is usually restricted to 45° in bench planes, can be increased to the steeper 50° or 55° angles of the renowned English smoothing...
€89.10
Article No. 717887
Lie-Nielsen Dowel Plate
Dowel plate made of surface ground A2 tool steel with a hardness of 60 HRC for producing perfect round bars, precision pins and chair spindles. The conical holes give your dowels sharp cutting edges and, by reducing friction, ensure that...
€163.60
Article No. 715187
Lie-Nielsen Dowel Plate
Dowel plate made of surface ground A2 tool steel with a hardness of 60 HRC for producing perfect round bars, precision pins and chair spindles. The conical holes give your dowels sharp cutting edges and, by reducing friction, ensure that...
€164.80
Article No. 715186
Lie-Nielsen Countersink 82°
For countersinking screws as well as countersinking and deburring holes in wood. Excellent chip removal and high surface quality. American cherry handle, brass ferrule.
€94.90
incl. VAT plus shipping costs
Article No. 920446
Lie-Nielsen Burnisher, Diameter 6.3 mm
Scraper burnisher with round cross-section for normal burnishing pressure and for use on round scraper edges. The surface is finely polished for a smooth drawing movement and thus an even burr. A solid brass ferrule joins the blade to...
€94.90
incl. VAT plus shipping costs
Article No. 920483
Lie-Nielsen Honing Guide
Solid side clamping honing guide, made of stainless steel, with a bronze bearing. The different removable jaws allow for the clamping of chisels with a blade width of under 5 mm, of mortise chisels, short plane blades and skew blades....
€189.90
incl. VAT plus shipping costs
Article No. 701211
Long Jaws for Lie-Nielsen Honing Guide
The long jaws fit all spokeshave blades and match the following Lie-Nielsen planes: Low-angle jack rabbet plane, bench rabbet plane, cabinet maker's scraper No. 85, shoulder plane. These jaws are reversible. The short end hones a bevel...
€55.80
Article No. 701213
Chisel Jaws for Lie-Nielsen Honing Guide
The chisel jaws fit 3 mm (1/8 inch) and 4.5 mm (3/16 inch) Lie-Nielsen bevel edge chisels as well as 6-19 mm (1/4 to ¾ inch) standard bevel edge chisels.
€55.80
Article No. 701214
Mortise Chisel Jaws for Lie-Nielsen Honing Guide
The mortise chisel jaws fit all Lie-Nielsen mortise chisels, as well as the 25 mm (1 inch) bevel edge chisel.
€55.80
Article No. 701215
Lie-Nielsen Honing Guide Screwdriver
This screwdriver is made to fit the captive screws in the removable jaws for the Lie-Nielsen Honing Guide. Stainless steel blade, American cherry handle with brass ferrule. Overall length 137 mm
€64.90
incl. VAT plus shipping costs
Article No. 701212