Herdim
Products from Herdim
Herdim® is DICTUM®'s own brand for products in the field of musical instrument making.
Herdim Crack-Gluing Clamp
Small specialty tool for gluing cracks. Galvanized steel. (Can be tightened with a M2 hex wrench, not included). The blocks lining the crack are cut off after gluing. Opening 12 mm, Depth 5 mm.
€4.90
incl. VAT plus shipping costs
Article No. 705934
Herdim Fingerboard Projection Gauge
Precise tool with a digital reading to control and maintain one of the most important dimensions on a violin - the fingerboard projection. A precise value to be obtained in a second, works also with smaller sizes of violins and with all...
€78.70
incl. VAT plus shipping costs
Article No. 707004
Herdim Scroll Gouges
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
€49.10
incl. VAT plus shipping costs
Article No. 715531
Herdim Scroll Gouges
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
€50.90
incl. VAT plus shipping costs
Article No. 715533
Herdim Scroll Gouges
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
€49.30
incl. VAT plus shipping costs
Article No. 715536
Herdim Scroll Gouges
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
€48.70
incl. VAT plus shipping costs
Article No. 715539
Herdim Scroll Gouges, 12-Piece Set
This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
€556.00
incl. VAT plus shipping costs
Article No. 715550
€168.00
incl. VAT plus shipping costs
Article No. 730103
Herdim System Peg Shaper, Violin, Viola
Anodized aluminium body. Brass adjustment screws. Extra hard tool steel blade (62 HRC), honed edge. Nominal Ø (final diameter at the peg collar) 7.5 mm.
€201.20
incl. VAT plus shipping costs
Article No. 730105
€129.50
incl. VAT plus shipping costs
Article No. 730201
€65.00
incl. VAT plus shipping costs
Article No. 730502
€109.00
incl. VAT plus shipping costs
Article No. 730505