Veritas Narrow Blade Clamp for Veritas Sharpening System II
Convert your standard Veritas Sharpening System II (No. 703666 ) into a self-centring double jaw honing guide. Simply replace the standard clamping unit by the double jaw clamp and you're done! The double jaw honing device allows for the...
€59.60
incl. VAT plus shipping costs
Article No. 703843
Magna-Tec Delta-S Rubbing Alcohol
Isopropyl alcohol 99.9 %, 50 ml glass bottle. Suitable for the Magna-Tec Delta-S sharpening system (No. 708560 ).
€4.40
(Content: €88.00 / 1 litre)
incl. VAT plus shipping costs
Article No. 708581
30° Skewed Jaws for Lie-Nielsen Honing Guide
The 30° skewed jaws fit Lie-Nielsen side rabbet planes.
€55.80
incl. VAT plus shipping costs
Article No. 701218
€55.80
Article No. 701216
Lie-Nielsen Honing Guide Screwdriver
This screwdriver is made to fit the captive screws in the removable jaws for the Lie-Nielsen Honing Guide. Stainless steel blade, American cherry handle with brass ferrule. Overall length 137 mm
€64.90
incl. VAT plus shipping costs
Article No. 701212
Mortise Chisel Jaws for Lie-Nielsen Honing Guide
The mortise chisel jaws fit all Lie-Nielsen mortise chisels, as well as the 25 mm (1 inch) bevel edge chisel.
€55.80
Article No. 701215
Chisel Jaws for Lie-Nielsen Honing Guide
The chisel jaws fit 3 mm (1/8 inch) and 4.5 mm (3/16 inch) Lie-Nielsen bevel edge chisels as well as 6-19 mm (1/4 to ¾ inch) standard bevel edge chisels.
€55.80
Article No. 701214
Long Jaws for Lie-Nielsen Honing Guide
The long jaws fit all spokeshave blades and match the following Lie-Nielsen planes: Low-angle jack rabbet plane, bench rabbet plane, cabinet maker's scraper No. 85, shoulder plane. These jaws are reversible. The short end hones a bevel...
€55.80
Article No. 701213
Lie-Nielsen Honing Guide
Solid side clamping honing guide, made of stainless steel, with a bronze bearing. The different removable jaws allow for the clamping of chisels with a blade width of under 5 mm, of mortise chisels, short plane blades and skew blades....
€189.90
incl. VAT plus shipping costs
Article No. 701211
Veritas Adapter for Sharpening System II, Mortise Chisel
This adapter extends the clamping height of the Veritas Sharpening System II for clamping mortise chisels with up to 18 mm blade thickness. By opening the brass screw on the top of the sharpening aid, you can insert the adapter and...
€14.50
incl. VAT plus shipping costs
Article No. 703904
KME Convex Sharpening Guide Rod
The convex guide rod allows you to sharpen rounded bevels on the KME sharpening system. This type of bevel is popular for hunting or outdoor knives and ensures a more stable cutting edge. Fits KME sharpening system No. 720448 und No....
€22.90
incl. VAT plus shipping costs
Article No. 720447
KME Stone Thickness Compensator
Due to the production process, the different abrasive types of the KME sharpening system may vary in thickness. This causes the bevel angle to change slightly on transition from one abrasive to the next. The stone thickness compensator...
€29.90
incl. VAT plus shipping costs
Article No. 720433