M. Power Tools DC Fasttrack MK2 Sharpening System

This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32°...
This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming adjustments. The dry grinding system means it can be used irrespective of environmental conditions. Hence, it is ideal for use on construction sites and anywhere where quick results are needed without requiring maximum sharpness.
  • Insertion of the magnetically attached diamond stone with corresponding grit
  • Insertion of slide with alignment for 25° and 30° bevel angles or 27°and 32° bevel angles
  • Insertion of plane blade/chisel and fixing in place at stop against counter-pressure
  • Grinding of bevel angle by moving the slide
  • Where necessary, removal of the burr on the back of the blade

Tool support and slide are made of solid milled and anodised aluminium with dovetail guide and wear-resistant nylon slide rail.
M. Power Tools DC Diamond Stones
Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.
  • Monocrystalline* diamond particles guarantee a long service life and excellent material removal
  • Uniform grit sizes and a dense diamond distribution for even grinding patterns
  • Cross-shaped recesses prevent clogging due to grinding debris
  • Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix
Monocrystalline* diamond-coated sharpening devices:
Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.
* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lesser quality diamond sharpening tools.

    Scope of delivery

    Fasttrack MK2 sharpening system, 1 x diamond stone medium-coarse, 1 x diamond stone medium-fine, cleaning block, removable fence, non-slip mat.
     
    more
    less
    Further details on the manufacturer

    M. Power Tools

    • Max. blade width 64 mm
     
    Sharpening tools: 5 methods for sharpening knives
     
    Article no. 740851
    €83.90 €69.90 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    M. Power Tools DC Fasttrack MK2 Sharpening System
      €83.90
    €69.90
     
    M. Power Tools DC Fasttrack MK2 Sharpening System, Set
      €125.90
     
    Plenty of accessories and spare parts

    Accessories

    €11.30 €9.40

    incl. VAT plus shipping costs

    Article No. 740831

    M. Power Tools DC Fasttrack De-Burring Plate, Extra-Fine

    M. Power Tools DC Fasttrack De-Burring Plate, Extra-Fine

    For de-burring the mirror side of chisels after sharpening. Self-adhesive. Fits No. 740851 , 740852 .
    €15.50

    incl. VAT plus shipping costs

    Article No. 740832

    M. Power Tools DC Fasttrack Diamond Stone, Angled by 2.5°, Extra Coarse

    M. Power Tools DC Fasttrack Diamond Stone, Angled by 2.5°,...

    Due to the 2.5° angled sharpening surface, the angles 22.5°, 27.5° and 32.5° can also be produced with sharpening system No. 740830 and the angles 17.5° and 22.5° with knife sharpener No. 740844 . With magnetic insert. Fits No....
    variants
    €15.50

    incl. VAT plus shipping costs

    Article No. 740845

    M. Power Tools DC Fasttrack Mini Strop

    M. Power Tools DC Fasttrack Mini Strop

    Mini strop made of genuine leather for honing chisels and plane blades with sharpening system No. 740830 . With the adhesive surface on the underside, you can simply stick the strop to the back of the sharpening system.
    €15.50

    incl. VAT plus shipping costs

    Article No. 740850