Shapton® Glass Stone HR Sharpening Stone, Hard Bond, Grit 1000
Product no.:
711603
Brand:
Shapton
€43.00 €36.13
per piece(s)
Product late November 2025 Available
- Abrasive layer thickness 5 mm
- Abrasive surface size 210 x 70 mm
- Application Sharpening, from K600 to 3000, for sharpening blunt cutting edges
- Base Tempered glass
- Bond type ceramic
Description
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents of tool steels (e.g. chromium and vanadium) require a stone that wears slowly.
Glass Stones by Shapton®
The premium range from Japanese company Shapton is the glass stone series. The sharpening particles are highly pure and homogeneous. This is noticeable when changing to finer grits: The traces from the previous grit are quickly ground out. A special bond allows quick sharpening on a flat surface. The sharpening stone has a base of tempered glass and is thus 100 % warp-free. Conventional sharpening stones may warp microscopically by absorbing water, but Shapton stones solve this problem with their extremely flat base of tempered glass.
Another advantage of the glass base is that the grit rating on the underside is always visible even after much use. Before use, spray the stones with water. It is not recommended to keep them in water permanently. White aluminium oxide abrasive.
Another advantage of the glass base is that the grit rating on the underside is always visible even after much use. Before use, spray the stones with water. It is not recommended to keep them in water permanently. White aluminium oxide abrasive.
Properties
| Abrasive layer thickness: | 5 mm |
|---|---|
| Abrasive surface size: | 210 x 70 mm |
| Application: | Sharpening, from K600 to 3000, for sharpening blunt cutting edges |
| Base: | Tempered glass |
| Bond type: | ceramic |
| Dimensions: | 210 x 70 x 10 mm |
| Grade of wear: | low |
| Körnung: | 1000 |
| Purity of the grain: | very high |
| Recommended steels: | hochlegierte Werkzeugstähle |
| Schleifmittel: | White aluminium oxide |
| Tool type: | Knives and tools |
| Typ: | Synthetic stones |
Properties
| Abrasive layer thickness: | 5 mm |
|---|---|
| Abrasive surface size: | 210 x 70 mm |
| Application: | Sharpening, from K600 to 3000, for sharpening blunt cutting edges |
| Base: | Tempered glass |
| Bond type: | ceramic |
| Dimensions: | 210 x 70 x 10 mm |
| Grade of wear: | low |
| Körnung: | 1000 |
| Purity of the grain: | very high |
| Recommended steels: | hochlegierte Werkzeugstähle |
| Schleifmittel: | White aluminium oxide |
| Tool type: | Knives and tools |
| Typ: | Synthetic stones |
Accessories
Zubehör
Frequently bought together
Upselling
Additional content
-
EXPERT KNOWLEDGE Sharpening devices
