Locking Ring ASR
Description
Once mounted on the groove of the spindle and the groove of the clamping attachment, this locking ring prevents the clamping attachments (e.g. chuck, faceplate, etc.) from coming off or braking the lathe during operation.
However, the locking ring can only be used with lathes equipped with a M33 x 3.5 DIN 800 spindle connection and clamping attachments that both feature a EURO locking ring groove.
Suitable for all Hager lathes.
Suitable for Teknatool SuperNova2 and Infinity chucks.
(Hex key not included)
However, the locking ring can only be used with lathes equipped with a M33 x 3.5 DIN 800 spindle connection and clamping attachments that both feature a EURO locking ring groove.
Suitable for all Hager lathes.
Suitable for Teknatool SuperNova2 and Infinity chucks.
(Hex key not included)
Properties
Locking Ring (ASR)
Properties
Locking Ring (ASR)
Manufacturer
Teknatool
Teknatool has been producing innovative machines and woodworking tools since 1980. In 1983, the company developed one of the first modern jaw chucks for woodturners. Since then, Teknatool has gained a reputation worldwide in particular for its four-jaw chucks. Sold under a renowned international brand, these chucks are now being used by tens of thousands of woodturners and distinguish themselves through their robustness and extensive range of jaws. Teknatool chucks are considered especially safe because the jaws do not protrude beyond the base body and are secured against accidental unscrewing or exceeding the maximum clamping distance.
