SawStop Circular Saw Blade TC 254 x 3.0 x 30, W60
Product no.:
721654K
Brand:
SawStop
€59.00 €49.58
per piece(s)
In stock, delivery time approx. 3-5 working days
- Bohrungs-Ø 30 mm
- Drehzahl max. 5500 1/min
- Fits SawStop »Compact« and »Jobsite Pro« Circular Bench Saws.
- Maschine/Zubehör Accessories
- Maschinen-Typ Circular bench saws, Circular bench saws
Description
The blade body features expansion slots to reduce vibration, noise, and heat build-up. Rake angle 15°, top angle 10°. Fits SawStop »Compact« and »Jobsite Pro« Circular Bench Saws.
Alternating teeth:
Highly versatile – suitable for hardwoods and softwoods (wet and dry), and for board materials such as uncoated or veneered particleboard, blockboard, or plywood.
Alternating teeth:
Highly versatile – suitable for hardwoods and softwoods (wet and dry), and for board materials such as uncoated or veneered particleboard, blockboard, or plywood.
The Active Injury Mitigation (AIM) system by SawStop
This revolutionary safety technology was developed by SawStop to stop the circular saw blade the moment it comes into contact with skin.
The saw blade is supplied with a low-voltage signal. This voltage is continuously monitored on the opposite side of the blade. When a finger touches the blade, the voltage drops because the human body is conductive and grounded. Once a threshold value is undercut, the system triggers within just 25 microseconds. At that moment, a fuse wire melts, releasing a preloaded spring mechanism that propels an aluminium brake block into the spinning blade with high force. The brake stops the blade in approximately 5 milliseconds. Due to the sudden deceleration, the blade is simultaneously retracted below the table surface and pulled away from the point of contact – typically a finger.
Although minor skin injuries such as abrasions may occur, the system effectively reduces the risk of serious cuts.
After activation, the brake cartridge and saw blade must be replaced. However, the replacement process is user-friendly and can be completed within a few minutes.
The saw blade is supplied with a low-voltage signal. This voltage is continuously monitored on the opposite side of the blade. When a finger touches the blade, the voltage drops because the human body is conductive and grounded. Once a threshold value is undercut, the system triggers within just 25 microseconds. At that moment, a fuse wire melts, releasing a preloaded spring mechanism that propels an aluminium brake block into the spinning blade with high force. The brake stops the blade in approximately 5 milliseconds. Due to the sudden deceleration, the blade is simultaneously retracted below the table surface and pulled away from the point of contact – typically a finger.
Although minor skin injuries such as abrasions may occur, the system effectively reduces the risk of serious cuts.
After activation, the brake cartridge and saw blade must be replaced. However, the replacement process is user-friendly and can be completed within a few minutes.
Properties
| Bohrungs-Ø: | 30 mm |
|---|---|
| Drehzahl max.: | 5500 1/min |
| Fits: | SawStop »Compact« and »Jobsite Pro« Circular Bench Saws. |
| Maschine/Zubehör: | Accessories |
| Maschinen-Typ: | Circular bench saws Circular bench saws |
| Schnittbreite: | 3.0 mm |
| Stammblattdicke: | 2.0 mm |
| Sägeblatt-Ø: | 254 mm |
| Zahnform: | Alternating teeth (AT) |
| Zähnezahl: | 60 |
Properties
| Bohrungs-Ø: | 30 mm |
|---|---|
| Drehzahl max.: | 5500 1/min |
| Fits: | SawStop »Compact« and »Jobsite Pro« Circular Bench Saws. |
| Maschine/Zubehör: | Accessories |
| Maschinen-Typ: | Circular bench saws Circular bench saws |
| Schnittbreite: | 3.0 mm |
| Stammblattdicke: | 2.0 mm |
| Sägeblatt-Ø: | 254 mm |
| Zahnform: | Alternating teeth (AT) |
| Zähnezahl: | 60 |
Manufacturer
SawStop
SawStop is not only a manufacturer of high-quality circular bench saws, but also the inventor of the AIM system, which stops the blade within 5 milliseconds upon skin contact. SawStop’s revolutionary Active Injury Mitigation (AIM) system has saved thousands of fingers and prevented countless serious hand injuries in the United States since the company was founded in 2000. Since 2017, SawStop has been part of Tooltechnic Systems (TTS), which also includes Festool and Shaper.
