Veritas® Bevel-Up Jack Rabbet Plane, PM-V11™ Blade
€436.00 €366.39
per piece
- Blade material PM-V11™
- Blade thickness 4.8 mm
- Blade width 57 mm
- Design / cutting angle Bevel up / cutting angle 40°-45°
- Overall length 384 mm
Description
One plane for all tasks
PM-V11™ Steel
PM-V11 steel is made from a new, powder metallurgy steel alloy. With its ultra-fine and homogeneous material structure and extreme hardness (HRC 61-63), this steel has double the edge-retention capacity of A2 steel. The extremely hard-wearing blades allow a razor-sharp edge and are highly durable even at a bevel angle of less than 20°. All blades come with a 2° microbevel and can be sharpened on conventional waterstones.
Hardly any other plane is as versatile: it is suitable for long door rebates, trimming panels, or wide cornices. It can also be used for trueing and smoothing, as well as for shaving end grain, thanks to its low cutting angle. For work in confined spaces, the rear handle can be tilted sideways so that the plane can always be guided comfortably and securely.
The blade is set bevel-up in the milled bed at a 15° angle. Bevel angle 25°. This results in a cutting angle of 40°.
- Removable long fence, infinitely adjustable up to 130 mm
- Flat sole – exactly square to the sides
- Full-width, adjustable mouth
- Spurs for tear-free edges, can be recessed when not in use
Properties
| Blade material: | PM-V11™ |
|---|---|
| Blade thickness: | 4.8 mm |
| Blade width: | 57 mm |
| Design / cutting angle: | Bevel up / cutting angle 40°-45° |
| Overall length: | 384 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Multi-purpose |
| Type: | Bench planes |
| Weight: | 2.7 kg |
Properties
| Blade material: | PM-V11™ |
|---|---|
| Blade thickness: | 4.8 mm |
| Blade width: | 57 mm |
| Design / cutting angle: | Bevel up / cutting angle 40°-45° |
| Overall length: | 384 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Multi-purpose |
| Type: | Bench planes |
| Weight: | 2.7 kg |
Manufacturer
Additional content
-
EXPERT KNOWLEDGE Planes
