Veritas® Bevel-Up Jack Rabbet Plane, A2 Blade
Product no.:
732130
Brand:
Veritas
€429.00 €360.50
per piece
Delivery time 2-3 business days
- Blade material A2 steel
- Blade thickness 4.8 mm
- Blade width 57 mm
- Design / cutting angle Bevel up / cutting angle 40°-45°
- Overall length 384 mm
Description
One plane for all tasks
Blade of A2 steel cryogenically hardened to 61 HRC with good edge-holding ability.
This plane combines the features of the low-angle jack plane No. 62 with those of a shoulder plane.
Hardly any other plane is as versatile: it is suitable for long door rebates, trimming panels, or wide cornices. It can also be used for trueing and smoothing, as well as for shaving end grain, thanks to its low cutting angle. For work in confined spaces, the rear handle can be tilted sideways so that the plane can always be guided comfortably and securely.
The blade is set bevel-up in the milled bed at a 15° angle. Bevel angle 25°. This results in a cutting angle of 40°.
Hardly any other plane is as versatile: it is suitable for long door rebates, trimming panels, or wide cornices. It can also be used for trueing and smoothing, as well as for shaving end grain, thanks to its low cutting angle. For work in confined spaces, the rear handle can be tilted sideways so that the plane can always be guided comfortably and securely.
The blade is set bevel-up in the milled bed at a 15° angle. Bevel angle 25°. This results in a cutting angle of 40°.
- Removable long fence, infinitely adjustable up to 130 mm
- Flat sole – exactly square to the sides
- Full-width, adjustable mouth
- Spurs for tear-free edges, can be recessed when not in use
Veritas® Planes
The corporate philosophy of Canadian tool manufacturer Veritas aims to develop new adjustment mechanisms and enhance historic plane design. With bodies made of stress-relieved spheroidal cast iron, these tools are highly resistant to cracking and distortion. Their soles are perfectly plane and trued at right angles to the sides. Their thick blades of high-strength A2 steel are hardened to 60-62 HRC and additionally subjected to a special low-temperature process to achieve a finer grain. Veritas planes are optionally available with PM-V11 blades. (The Custom series models are equipped with PM-V11 blades as standard). Two setscrews on the sides constrain the blade laterally, keeping it in place regardless of the type of stress applied. Unless otherwise stated, the blade is angled at 45°. With their material combination of finely-ground or black-coated cast iron bodies, polished brass setscrews and beautiful torrefied maple handles, these planes are also pleasing to the eye.
Properties
| Blade material: | A2 steel |
|---|---|
| Blade thickness: | 4.8 mm |
| Blade width: | 57 mm |
| Design / cutting angle: | Bevel up / cutting angle 40°-45° |
| Overall length: | 384 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Multi-purpose |
| Type: | Bench planes |
| Weight: | 2.7 kg |
Properties
| Blade material: | A2 steel |
|---|---|
| Blade thickness: | 4.8 mm |
| Blade width: | 57 mm |
| Design / cutting angle: | Bevel up / cutting angle 40°-45° |
| Overall length: | 384 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Multi-purpose |
| Type: | Bench planes |
| Weight: | 2.7 kg |
Manufacturer
Veritas Tools steht seit Jahrzehnten für Präzision, Innovation und kompromisslose Qualität – ein Synonym für feinste Handwerkskunst, das weltweit von Holzliebhabern und Profis gleichermaßen geschätzt wird.
Additional content
-
EXPERT KNOWLEDGE Planes
