Veritas® Bench Planes No. 4½, PM-V11™ Blade
€387.00 €325.21
per piece
- Blade material PM-V11™
- Blade thickness 3.2 mm
- Blade width 60 mm
- Design / cutting angle Bevel down / cutting angle 40°-45°
- Overall length 255 mm
Description
PM-V11™ Steel
PM-V11 steel is made from a new, powder metallurgy steel alloy. With its ultra-fine and homogeneous material structure and extreme hardness (HRC 61-63), this steel has double the edge-retention capacity of A2 steel, and the extremely hard-wearing blades allow a razor-sharp edge. The blades are highly durable even at a bevel angle of less than 20°. All blades come with a 2° micro bevel and can be sharpened on conventional waterstones.
With a blade width of 60 mm, the 4 ½ bench plane from Veritas is the perfect tool for smoothing large surfaces. The plane's 3.2 mm thick blade and 2.3 kg weight ensure it runs smoothly and produces the best results, even with difficult grain patterns. The large handles are comfortable to hold, and the rear extension handle makes it easy to control vibration and distribute pressure. Two set screws constrain the blade laterally, ensuring the blade stays in place regardless of the pressure placed upon it. Large sole, combined feed and lateral adjustment lever.
Properties
| Blade material: | PM-V11™ |
|---|---|
| Blade thickness: | 3.2 mm |
| Blade width: | 60 mm |
| Design / cutting angle: | Bevel down / cutting angle 40°-45° |
| Overall length: | 255 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Smoothing (fine finishing) |
| Type: | Bench planes |
| Weight: | 2.3 kg |
Properties
| Blade material: | PM-V11™ |
|---|---|
| Blade thickness: | 3.2 mm |
| Blade width: | 60 mm |
| Design / cutting angle: | Bevel down / cutting angle 40°-45° |
| Overall length: | 255 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Smoothing (fine finishing) |
| Type: | Bench planes |
| Weight: | 2.3 kg |
Manufacturer
Additional content
-
EXPERT KNOWLEDGE Planes
