Veritas® Bench Plane No. No.5 ¼W, PM-V11™ Blade
€379.00 €318.49
per piece
- Blade material PM-V11™
- Blade thickness 3.2 mm
- Blade width 51 mm
- Design / cutting angle Bevel down / cutting angle 40°-45°
- Overall length 305 mm
Description
PM-V11™ Steel
PM-V11 steel is made from a new, powder metallurgy steel alloy. With its ultra-fine and homogeneous material structure and extreme hardness (HRC 61-63), this steel has double the edge-retention capacity of A2 steel, and the extremely hard-wearing blades allow a razor-sharp edge. The blades are highly durable even at a bevel angle of less than 20°. All blades come with a 2° micro bevel and can be sharpened on conventional waterstones.
Thanks to the central adjusting screw, the blade feed and lateral position can be adjusted quickly and precisely. The rear handle and frog form a movable unit that defines the mouth opening without having to readjust the cutting depth. Two set screws lock the blade laterally, ensuring it stays in place regardless of the pressure applied. Large sole, central adjustment screw for cuts of any depth and lateral position adjustment.
Properties
| Blade material: | PM-V11™ |
|---|---|
| Blade thickness: | 3.2 mm |
| Blade width: | 51 mm |
| Design / cutting angle: | Bevel down / cutting angle 40°-45° |
| Overall length: | 305 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Smoothing (fine finishing) |
| Type: | Bench planes |
| Weight: | 2.2 kg |
Properties
| Blade material: | PM-V11™ |
|---|---|
| Blade thickness: | 3.2 mm |
| Blade width: | 51 mm |
| Design / cutting angle: | Bevel down / cutting angle 40°-45° |
| Overall length: | 305 mm |
| Plane body: | Spheroidal cast iron |
| Purpose: | Smoothing (fine finishing) |
| Type: | Bench planes |
| Weight: | 2.2 kg |
Manufacturer
Additional content
-
EXPERT KNOWLEDGE Planes
