Skip to main content

Free standard shipping over 178,5€

Free standard shipping over €178,5 (excl. VAT)
14-day return policy

Language

Currency

Pricing

The price display refers to all prices and can be changed at any time.

Build your own marten-proof nesting box

In this nesting box, the brood of tits, sparrows and other birds is safely protected from martens. A ledge prevents martens from stealing the small birds from the nest box. The ledge also offers the adult birds an opportunity to rest or dry out when the weather is bad. These instructions will tell you everything you need to know about building this nest box and what materials and tools you will need.


What tools do I need to build a nesting box?

  • Saw for cutting to size (circular saw)
  • Saw for the notches (band saw or jigsaw)
  • Drill/ cordless screwdriver
  • Suitable bits and Forstner bits
  • Hammer
  • Clamps
  • Rasp and wire brush


What material to use for a nest box?

Solid wood is best suited for building a nest box. Boards made of weather-resistant wood such as larch, pine, oak or ash are ideal. If you use board material, make sure that it is glued to be waterproof. In addition to the wood, you will also need waterproof glue (e.g. Titebond II Glue Premium), nails and/or wood screws.

Cutting list and nesting box construction plan

Download our PDF with the materials list and the working drawing here. It contains the dimensions and positions of all parts. The size of the nesting box is designed for small birds such as tits, sparrows or wrynecks. You can enlarge the box accordingly for larger birds such as starlings. The drawing is designed for a material thickness of 18 mm. For other material or panel thicknesses, you will need to adjust the dimensions accordingly. You can watch every step of the process in detail in our YouTube video.


You will find all the dimensions for building the nest box in the construction plan.

Material:

Larch/pine/oak/ash, 18 mm thick

All dimensions in millimetres


1st roof
250 x 190
2. back wall260 x 124
3. floor124 x 124
4. maintenance cover150 x 124
5. shoulder board60 x 124
6. flight hole board70 x 160
7. sides (2x)260 x 202
8. cover strips (2x)160 x 20
9. end strips160 x 40
10. suspension moulding400 x 40


How can I build a nesting box myself? (Work steps)


1. cutting to size.

Cut the wood according to the cutting list. The easiest way to do this is with a circular table saw (e.g. Mafell Erika 60).


2. cutting the side parts.

Use a jigsaw (e.g. Festool PS 300) or band saw to notch the front edge of the side parts to a depth of 60 mm and cut the top edge at an angle to create the sloping roof.


3. chamfer the roof, back panel and entrance board.

To ensure that the roof lies flush on the side panels, you must bevel the top edge of the back panel and the flight hole board. The roof is bevelled on the rear edge. You can transfer the angle of the bevelled edge from the cut side parts. If you cut the parts to size with a circular saw, you can also cut the bevelled edges directly during cutting. You can subsequently plane the bevels (e.g. with a DICTUM one-hand plane, flat angle 12°).


4. drill the entrance hole.

The size of the entrance hole depends on the bird species that is to breed in the nest box. An overview of common diameters can be found below. Drill the entrance hole with a suitable Forstner bit (e.g. Forstner bit set, 10-piece).


5. air holes in the floor.

Drill four small holes in the base of the nest box to ensure that the box is sufficiently ventilated and moisture can drain away.


6. roughen the inside.

Use a wire brush or rasp to roughen the insides of the side panels and the maintenance cover so that the young birds can climb up them more easily.

7. assembling the body.

You have the choice of joining the parts of the nesting box with nails or screwing them together. In our video tutorial, we have nailed all the parts of the body together and screwed on the roof so that it can be removed for any repairs to the nest box. With the exception of the roof and the maintenance cover, all parts of the nesting box are also glued together with waterproof glue (e.g. Titebond II Glue Premium). First connect one side section to the back wall and the base. Then connect the second side panel. Now insert the ledge board and attach the flight hole board. The last part to be attached for the time being is the end moulding at the bottom. This completes the assembly of the basic body.


The parts of the nesting box are nailed or screwed together.

8. insert the maintenance cover.

In order to be able to check and clean the nesting box, it has an ingenious maintenance cover underneath the landing. This cover is simply inserted and pushed downwards like a Japanese toolbox and is only held in place by its two cover strips. For this to work, the cover strips must be precisely aligned.


To do this, slide the maintenance cover into its future position in the body and mark the upper edge of the cover moulding on the cover. This is the position of the lower cover moulding. Once this has been fitted, push the cover back in and open it so that it can be pulled out downwards. Now place the upper cover moulding on the ledge and mark its lower edge on the cover. You can now align and fit the second cover moulding to this mark. If the cover cannot be inserted or opened now, you can push or chamfer the lower edge of the maintenance cover until the cover has enough play to open easily. The video shows you exactly how to fit the cover.


The cover can be opened for maintenance like a Japanese toolbox.


9 Fit the roof and suspension.

Finally, the roof is attached and the suspension bar is fitted.

What size should the entrance hole of a nest box be?

The size of the entrance hole must be drilled to suit the bird species that is to nest in the nest box. As our box is more suitable for smaller bird species, the following diameters are possible:

26 to 28 mm for small tits such as blue tits and fir tits

32 to 34 mm for great tits, nuthatches and sparrows


Some bird species prefer a high oval instead of a round flight hole. For redstarts and wrens, this should be approx. 48 x 32 mm.


If you enlarge the dimensions of the nesting box slightly, you can also provide nesting aids for larger birds using the same plan. For starlings, the entrance hole can have a diameter of 45 to 55 mm.


How and where to hang the nest box?

Hang the nesting box in a place protected from the weather. It should not be hung in the rain or in direct sunlight. Face the entrance hole away from the weather (west) to the east/southeast. Aluminium nails are suitable for attaching to trees. These do not interfere with the tree's growth and leave saw blades undamaged during subsequent wood processing. You can also tie the nest box to the tree trunk with two tension belts or hemp ropes at the protruding suspension bar.


Which colours or paints are suitable for nest boxes?

If the nesting box is made of weatherproof wood (larch, pine, oak, ash) and is hung up protected from the weather, it can do without additional surface protection. Otherwise, the environmentally friendly hard oils and hard oil waxes from Asuso are suitable for filling the nest box. If you want to paint the box colourfully, you can get creative with linseed oil paints, for example.

Unsere Top Auswahl für Sie



Folgende Beiträge könnten Sie interessieren



Stichsägeblätter

How to find the right sheet for different tasks and materials
Zum Blog

Japanische Werkzeugkiste

Simply built, not just for tools
Zum Blog

When you order from us

In-house development and manufacturing

we develop, manufacture and continually refine our tools to meet the highest standards

Quality checked at every stage

steel analysis and hardness testing in our own laboratory, complemented by expert inspection of function and workmanship

Over 175 years of craft expertise

Since 1848, we have brought together knowledge, tradition and exceptional tools from around the world

A newsletter that’s worth subscribing to

  • Exciting new products
  • Exclusive offers for subscribers
  • Tips and tricks for the workshop, kitchen and garden
  • Latest news from DICTUM
Subscribe to the newsletter