Abatron LiquidWood® Epoxy Resin, 950 ml
Product no.:
745080
Brand:
LiquidWood
€78.60 €66.05
per set
Product mid December 2026 Available
- Content 950 ml
Hazard statements:
Causes serious eye damage.
May cause an allergic skin reaction.
Harmful to aquatic life with long lasting effects.
Suspected of causing cancer.
Causes severe skin burns and eye damage.
Causes skin irritation.
May cause respiratory irritation.
Suspected of causing genetic defects.
Harmful if swallowed.
Hazardous goods are only shipped within Europe.
Description
2-component epoxy resin for consolidating loose and porous substrates
LiquidWood is a liquid resin that penetrates between loose wood fibres and into holes, cracks and joints, consolidating wood that is rotten or weathered, for example. Suitable for indoor and outdoor use, especially on structural timber, windows, columns, beams, decks, boats, furniture, sculptures and all architectural wood elements. Apply to dry, bare wood by brushing, pouring or direct injection.
Features and benefits:
LiquidWood epoxy resin has a low viscosity, allowing it to penetrate deeply into the wood and saturate porous wood and damaged fibres before curing. It is free of water and solvents. This reduces shrinkage and helps improve adhesion. It is low-odour and, according to the manufacturer, has low VOC emissions (volatile organic compounds). The treatment can improve the wood’s resistance to weathering and insects. The resin cures within a few hours and can then be sawn, planed, drilled, nailed, milled, sanded and painted like wood. It can also be used as a primer or thinner for WoodEpox (Nos. 745081, 745082, 745083).
Technical information: Mixing ratio 1:1. Pot life: approx. 30 minutes. Cures within a few hours, depending on temperature and other environmental conditions. 100% epoxy solids. Water-resistant. Coverage depends on the absorbency and porosity of the wood. Application temperature range: 10–35°C. 100% compatible with WoodEpox.
Features and benefits:
LiquidWood epoxy resin has a low viscosity, allowing it to penetrate deeply into the wood and saturate porous wood and damaged fibres before curing. It is free of water and solvents. This reduces shrinkage and helps improve adhesion. It is low-odour and, according to the manufacturer, has low VOC emissions (volatile organic compounds). The treatment can improve the wood’s resistance to weathering and insects. The resin cures within a few hours and can then be sawn, planed, drilled, nailed, milled, sanded and painted like wood. It can also be used as a primer or thinner for WoodEpox (Nos. 745081, 745082, 745083).
Technical information: Mixing ratio 1:1. Pot life: approx. 30 minutes. Cures within a few hours, depending on temperature and other environmental conditions. 100% epoxy solids. Water-resistant. Coverage depends on the absorbency and porosity of the wood. Application temperature range: 10–35°C. 100% compatible with WoodEpox.
Properties
| Content: | 950 ml |
|---|
Properties
| Content: | 950 ml |
|---|