SawStop Floating Overarm Dust Collection
Product no.:
721774K
Brand:
SawStop
€599.00 €503.36
per piece(s)
Delivery time approx. 3-5 working days
- Machine/Accessory Machines
- Machine type Circular bench saw
Description
Essential for dado blade sets
Efficient dust extraction directly above the cutting area. The transparent blade guard lifts easily for quick blade access.
The overarm supporting the blade guard can be swung back or moved away from the blade.
The overarm incorporates a dust collection tube with a 75 mm inner diameter, allowing high extraction performance with an airflow requirement of only 680 m³/h. Dust port connection diameter: 100 mm.
When using dado blades on the SawStop Professional Cabinet Saw, the floating overarm dust collection system must be used.
The overarm supporting the blade guard can be swung back or moved away from the blade.
The overarm incorporates a dust collection tube with a 75 mm inner diameter, allowing high extraction performance with an airflow requirement of only 680 m³/h. Dust port connection diameter: 100 mm.
When using dado blades on the SawStop Professional Cabinet Saw, the floating overarm dust collection system must be used.
- Blade guard dimensions: 9 × 47 cm
- Distance between blade and support leg: 91–173 cm
- Dust tube inner diameter: 75 mm, overarm outer diameter: 100 mm
- Height from table to overarm: 340 mm
- Required airflow: 680 m³/h
Properties
| Machine/Accessory: | Machines |
|---|---|
| Machine type: | Circular bench saw |
Properties
| Machine/Accessory: | Machines |
|---|---|
| Machine type: | Circular bench saw |
Manufacturer
SawStop
SawStop is not only a manufacturer of high-quality circular bench saws, but also the inventor of the AIM system, which stops the blade within 5 milliseconds upon skin contact. SawStop’s revolutionary Active Injury Mitigation (AIM) system has saved thousands of fingers and prevented countless serious hand injuries in the United States since the company was founded in 2000. Since 2017, SawStop has been part of Tooltechnic Systems (TTS), which also includes Festool and Shaper.
