SawStop Circular Saw Blade Titanium, TC 254 x 2.6 x 30, W40
€89.00 €74.79
per piece
- Blade body thickness 2.0 mm
- Bohrungs-Ø 30 mm
- Cutting width 2.6 mm
- Fits SawStop »Compact« and »Jobsite Pro« Circular Bench Saws.
- Machine/Accessory Accessories
Description
Rake angle 15°, clearance angle 15°, top angle 10°.
Alternating teeth:
Highly versatile – suitable for hardwoods and softwoods (wet and dry), and for board materials such as uncoated or veneered particleboard, blockboard, or plywood.
The saw blade is supplied with a low electrical current. This voltage is continuously monitored on the opposite side of the blade. If the blade comes into contact with skin, the electrical signal changes because the human body is conductive. Once a threshold value is undercut, the system triggers within just 25 microseconds. At that moment, a fuse wire melts, releasing a preloaded spring mechanism that propels an aluminium brake block into the spinning blade with high force. The brake stops the blade in approximately 5 milliseconds. Due to the sudden deceleration, the blade is simultaneously retracted below the table surface and pulled away from the point of contact – typically a finger.
Although minor skin injuries such as abrasions may occur, the system effectively reduces the risk of serious cuts.
After activation, the brake cartridge and saw blade must be replaced. However, the replacement process is user-friendly and can be completed within a few minutes.
Properties
| Blade body thickness: | 2.0 mm |
|---|---|
| Bohrungs-Ø: | 30 mm |
| Cutting width: | 2.6 mm |
| Fits: | SawStop »Compact« and »Jobsite Pro« Circular Bench Saws. |
| Machine/Accessory: | Accessories |
| Machine type: | Circular bench saw |
| Max. speed: | 7200 1/min |
| Number of teeth: | 40 |
| Saw blade diameter: | 254 mm |
Properties
| Blade body thickness: | 2.0 mm |
|---|---|
| Bohrungs-Ø: | 30 mm |
| Cutting width: | 2.6 mm |
| Fits: | SawStop »Compact« and »Jobsite Pro« Circular Bench Saws. |
| Machine/Accessory: | Accessories |
| Machine type: | Circular bench saw |
| Max. speed: | 7200 1/min |
| Number of teeth: | 40 |
| Saw blade diameter: | 254 mm |
Manufacturer
SawStop
SawStop is not only a manufacturer of high-quality circular bench saws, but also the inventor of the AIM system, which stops the blade within 5 milliseconds upon skin contact. SawStop’s revolutionary Active Injury Mitigation (AIM) system has saved thousands of fingers and prevented countless serious hand injuries in the United States since the company was founded in 2000. Since 2017, SawStop has been part of Tooltechnic Systems (TTS), which also includes Festool and Shaper.
