Nano Hone® Polishing Stone, Grit 30 000 (0.5 microns)
Product no.:
711568
Brand:
Nano Hone
€249.00 €209.24
per piece(s)
Product late August 2025 Available
- Abrasive Corundum
- Abrasive layer thickness 12 mm
- Abrasive surface size 210 x 75 mm
- Base Aluminium base plate, purple
- Bond type ceramic
Description
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
These premium stones from the American manufacturer Nano Hone are produced in Japan. The sharpening particles are of high purity and homogeneity. This is noticeable in the transition to finer grains, with the grinding marks of the previous grit being quickly removed. A special bond enables fast grinding with a flat surface. The stone has an aluminium base plate and is therefore 100 % distortion-free. Conventional sharpening stones warp in the micro range due to the absorption of water. The extremely flat aluminium base of the Nano Hone stones solves this problem. Another advantage of the aluminium base is the good legibility of the grain, which remains visible even after prolonged use. In addition, the different grain sizes can be recognised even more quickly by the different base colours. Two bores in the aluminium base allow quick and easy mounting on the Nano Hone stone holder (No. 711569). The stones should be sprayed with water before use. Permanent storage in water is not recommended. White aluminium oxide abrasive.
Properties
| Abrasive: | Corundum |
|---|---|
| Abrasive layer thickness: | 12 mm |
| Abrasive surface size: | 210 x 75 mm |
| Base: | Aluminium base plate, purple |
| Bond type: | ceramic |
| Dimensions: | 210 x 75 x 15 mm |
| Grade of wear: | low |
| Grit: | 30 000 |
| Purity of the grain: | very high |
| Recommended steels: | High-alloy tool steels |
| Tool type: | Knives and tools |
| Typ: | Synthetic stones |
| Use: | Polishing, from K8000, for honing, stropping |
Properties
| Abrasive: | Corundum |
|---|---|
| Abrasive layer thickness: | 12 mm |
| Abrasive surface size: | 210 x 75 mm |
| Base: | Aluminium base plate, purple |
| Bond type: | ceramic |
| Dimensions: | 210 x 75 x 15 mm |
| Grade of wear: | low |
| Grit: | 30 000 |
| Purity of the grain: | very high |
| Recommended steels: | High-alloy tool steels |
| Tool type: | Knives and tools |
| Typ: | Synthetic stones |
| Use: | Polishing, from K8000, for honing, stropping |
Accessories
Zubehör
Manufacturer
Nano Hone
Nano Hone is part of HMS Enterprises Inc., which is headquartered in the USA and has a production site in Japan. Nano Hone has over 40 years of experience in the field of sharpening, dressing and woodworking, and is dedicated to developing outstanding, innovative and high-quality sharpening products.
| Name: | Nano Hone |
|---|---|
| Mailing address: | Shattuck St. 51 1463 Pepperell United States |
| Homepage: | https://nanohone.com |
