Naniwa® Standard Sharpening Stone, Grit 1000
Product no.:
711761
Brand:
Naniwa
€39.90 €33.53
per piece(s)
Product early March 2026 Available
- Abrasive White aluminium oxide
- Abrasive layer thickness 20 mm
- Abrasive surface size 210 x 70 mm
- Application Sharpening, from K600 to 3000, for sharpening blunt cutting edges
- Bond type Synthetic resin
Description
White aluminium oxide abrasive.
Standard by Naniwa®
This stone series is suitable for sharpening blunt knives and tool blades. The stone has a relatively hard bond, it therefore stays flat for a longer time. It is particularly suitable for high-alloy tool steels, but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.
Naniwa has changed the name and the packaging of this sharpening stone series (formerly Traditional Stone Series). The sharpening stone itself has not been changed.
Properties
| Abrasive: | White aluminium oxide |
|---|---|
| Abrasive layer thickness: | 20 mm |
| Abrasive surface size: | 210 x 70 mm |
| Application: | Sharpening, from K600 to 3000, for sharpening blunt cutting edges |
| Bond type: | Synthetic resin |
| Dimensions: | 210 x 70 x 20 mm |
| Grade of wear: | medium |
| Grit: | 1000 |
| Purity of the grain: | medium |
| Recommended steels: | All steels |
| Tool type: | Knives and tools |
| Typ: | Synthetic stones |
Properties
| Abrasive: | White aluminium oxide |
|---|---|
| Abrasive layer thickness: | 20 mm |
| Abrasive surface size: | 210 x 70 mm |
| Application: | Sharpening, from K600 to 3000, for sharpening blunt cutting edges |
| Bond type: | Synthetic resin |
| Dimensions: | 210 x 70 x 20 mm |
| Grade of wear: | medium |
| Grit: | 1000 |
| Purity of the grain: | medium |
| Recommended steels: | All steels |
| Tool type: | Knives and tools |
| Typ: | Synthetic stones |
Accessories
Zubehör
Manufacturer
Naniwa
Naniwa, one of the leading Japanese manufacturers of sharpening stones, has produced precision abrasives for cutting tools since 1941.
| Name: | Naniwa |
|---|---|
| Mailing address: | 17-17 Tenjin-No-Mori, Nishinari-Ku 557-0013 Osaka Japan |
| Homepage: | https://www.naniwa-abrasive.com |
Additional content
-
EXPERT KNOWLEDGE Sharpening devices
