Naniwa® Standard Shaping Stone, Grit 220
Product no.:
711760
Brand:
Naniwa
€34.90 €29.33
per piece
Delivery time approx. 3-5 working days
- Abrasive layer thickness 22 mm
- Abrasive surface size 210 x 70 mm
- Application Roughing, from K50 to 500, for high material removal
- Bond type Synthetic resin
- Dimensions 210 x 70 x 22 mm
Description
Shaping stone with good sharpening qualities. Silicon carbide abrasive.
Standard by Naniwa®
This stone series is suitable for sharpening blunt knives and tool blades. The stone has a relatively hard bond, it therefore stays flat for a longer time. It is particularly suitable for high-alloy tool steels, but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.
Naniwa has changed the name and the packaging of this sharpening stone series (formerly Traditional Stone Series). The sharpening stone itself has not been changed.
Properties
| Abrasive layer thickness: | 22 mm |
|---|---|
| Abrasive surface size: | 210 x 70 mm |
| Application: | Roughing, from K50 to 500, for high material removal |
| Bond type: | Synthetic resin |
| Dimensions: | 210 x 70 x 22 mm |
| For tool type: | Knives and tools |
| Grade of wear: | heavy |
| Grit: | 220 |
| Purity of the grain: | low |
| Recommended steels: | All steels |
| Schleifmittel: | Silicon carbide |
| Type: | Synthetic stones |
Properties
| Abrasive layer thickness: | 22 mm |
|---|---|
| Abrasive surface size: | 210 x 70 mm |
| Application: | Roughing, from K50 to 500, for high material removal |
| Bond type: | Synthetic resin |
| Dimensions: | 210 x 70 x 22 mm |
| For tool type: | Knives and tools |
| Grade of wear: | heavy |
| Grit: | 220 |
| Purity of the grain: | low |
| Recommended steels: | All steels |
| Schleifmittel: | Silicon carbide |
| Type: | Synthetic stones |
Manufacturer
Naniwa
Naniwa, one of the leading Japanese manufacturers of sharpening stones, has produced precision abrasives for cutting tools since 1941.
| Name: | Naniwa |
|---|---|
| Mailing address: | 17-17 Tenjin-No-Mori, Nishinari-Ku 557-0013 Osaka Japan |
| Homepage: | https://www.naniwa-abrasive.com |
Additional content
-
EXPERT KNOWLEDGE Sharpening devices
