Naniwa® Standard Honing Stone, Grit 6000
Product no.:
711763
Brand:
Naniwa
€56.90 €47.82
per piece
Product early March 2027 Available
- Abrasive layer thickness 20 mm
- Abrasive surface size 210 x 70 mm
- Application Honing, from K4000, for honing after sharpening
- Bond type Synthetic resin
- Dimensions 210 x 70 x 20 mm
Description
White aluminium oxide abrasive.
Standard by Naniwa®
This stone series is suitable for sharpening blunt knives and tool blades. The stone has a relatively hard bond, it therefore stays flat for a longer time. It is particularly suitable for high-alloy tool steels, but also for low-alloy carbon steels. The coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. Before use, soak the stone for at least 10 minutes. Do not keep it in water permanently.
Naniwa has changed the name and the packaging of this sharpening stone series (formerly Traditional Stone Series). The sharpening stone itself has not been changed.
Properties
| Abrasive layer thickness: | 20 mm |
|---|---|
| Abrasive surface size: | 210 x 70 mm |
| Application: | Honing, from K4000, for honing after sharpening |
| Bond type: | Synthetic resin |
| Dimensions: | 210 x 70 x 20 mm |
| For tool type: | Knives and tools |
| Grade of wear: | medium |
| Grit: | 6000 |
| Purity of the grain: | medium |
| Recommended steels: | All steels |
| Schleifmittel: | White aluminium oxide |
| Type: | Synthetic stones |
Properties
| Abrasive layer thickness: | 20 mm |
|---|---|
| Abrasive surface size: | 210 x 70 mm |
| Application: | Honing, from K4000, for honing after sharpening |
| Bond type: | Synthetic resin |
| Dimensions: | 210 x 70 x 20 mm |
| For tool type: | Knives and tools |
| Grade of wear: | medium |
| Grit: | 6000 |
| Purity of the grain: | medium |
| Recommended steels: | All steels |
| Schleifmittel: | White aluminium oxide |
| Type: | Synthetic stones |
Manufacturer
Naniwa
Naniwa, one of the leading Japanese manufacturers of sharpening stones, has produced precision abrasives for cutting tools since 1941.
| Name: | Naniwa |
|---|---|
| Mailing address: | 17-17 Tenjin-No-Mori, Nishinari-Ku 557-0013 Osaka Japan |
| Homepage: | https://www.naniwa-abrasive.com |
Additional content
-
EXPERT KNOWLEDGE Sharpening devices
