Lie-Nielsen® Tenon Saw
Product no.:
712026
Brand:
Lie-Nielsen
€339.00 €284.87
per piece
Product mid November 2026 Available
- Application Cutting mortise and tenon joints
- Blade length 405 mm
- Blade thickness 0.8 mm
- Cut depth 95 mm
- Handle shape/size D-Handle
Description
This backsaw with a large saw blade is perfect for deep cuts in the direction of the grain, such as cutting mortise and tenon joints. The well-balanced saw cuts efficiently on the push stroke and without jamming up to a depth of 9 cm.
Lie-Nielsen® Saws
Western saws of exceptional quality, optimised for specific uses. The blade teeth of Swedish spring steel are first milled and set on the machine and then fine-tuned by hand. Each saw undergoes an intensive cutting test before it leaves the factory. Handles of American cherry, secured with traditional split-nut screws, and a solid brass back complete these premium saws.
Properties
| Application: | Cutting mortise and tenon joints |
|---|---|
| Blade length: | 405 mm |
| Blade thickness: | 0.8 mm |
| Cut depth: | 95 mm |
| Handle shape/size: | D-Handle |
| Handle version: | American cherry |
| Overall length: | 540 mm |
| Setting: | 1.1 mm |
| Tooth pattern: | Triangular teeth for rip cuts Triangular teeth (rip teeth) |
| Tooth pitch: | 2.3 mm |
| ppi: | 11 |
| tpi: | 10 |
Properties
| Application: | Cutting mortise and tenon joints |
|---|---|
| Blade length: | 405 mm |
| Blade thickness: | 0.8 mm |
| Cut depth: | 95 mm |
| Handle shape/size: | D-Handle |
| Handle version: | American cherry |
| Overall length: | 540 mm |
| Setting: | 1.1 mm |
| Tooth pattern: | Triangular teeth for rip cuts Triangular teeth (rip teeth) |
| Tooth pitch: | 2.3 mm |
| ppi: | 11 |
| tpi: | 10 |
Accessories
Frequently bought together
Manufacturer
| Name: | Lie-Nielsen |
|---|---|
| Mailing address: | PO Box 9 4864 Warren United States |
| Homepage: | https://www.lie-nielsen.com |
