Henry Taylor® Roughing-out Gouge, Diamic, Blade Width 50 mm
€159.00 €133.61
per piece
- Bevel Straight grind (ready-to-use)
- Blade material M2-HSS
- Blade width 50 mm
- Form Roughing-out gouge
- Handle length 400 mm
Description
M2-HSS woodturning tools with stained English hardwood handle.
Important safety information:
Never use a roughing gouge for bowl turning! Keep the tool rest close to the workpiece and support the gouge as close to the cutting end as practical. Supporting it too close to the handle puts excessive stress on the thin transition to the tang and may cause the tool to break.
Henry Taylor® Turning Tools - versions available:
M2-HSS Diamic woodturning tool
Henry Taylor standard version, the blade material is an extremely durable M2-HSS. Handle made of stained English hardwood.
M2-HSS Kryo woodturning tool
Improved tool life and sharpness without compromising the sharpening process: Cryogenic hardening is a technically complex process in which the steel is cooled to -150 °C under computer control after hardening. After this treatment, the steel contains finer carbides that cannot form in the normal hardening process. This results in excellent properties such as longer service life than with conventional hardening, fine cutting-edge formation with little burr formation and easier sharpening. Handle made of stained English hardwood.
Properties
| Bevel: | Straight grind (ready-to-use) |
|---|---|
| Blade material: | M2-HSS |
| Blade width: | 50 mm |
| Form: | Roughing-out gouge |
| Handle length: | 400 mm |
| Handle material: | Stained hardwood |
| Overall length: | 580 mm |
| Type: | Roughing-out gouge |
| Version: | M2-HSS |
Properties
| Bevel: | Straight grind (ready-to-use) |
|---|---|
| Blade material: | M2-HSS |
| Blade width: | 50 mm |
| Form: | Roughing-out gouge |
| Handle length: | 400 mm |
| Handle material: | Stained hardwood |
| Overall length: | 580 mm |
| Type: | Roughing-out gouge |
| Version: | M2-HSS |
Frequently bought together
Manufacturer
Henry Taylor
For over 150 years, turning tools of the finest quality have been manufactured by Henry Taylor in Sheffield (England). The company combines traditional manufacturing techniques such as forging by hand with modern hardening and tempering treatments. Only the best Sheffield steel (HSS) is used for all blades, which are attached to the heavy, dark stained handles of English hardwood with solid brass ferrules. Henry Taylor Tools design their tools in cooperation with world-leading woodturners such as Roy Child, Richard Raffan, Dale and Darrel Nishi and David Ellsworth - which is reflected in the high quality of the tools.
| Name: | Henry Taylor |
|---|---|
| Mailing address: | The Forge, Peacock Estate, Livesey Street S6 2BL Sheffield United Kingdom |
| Homepage: | https://henrytaylortools.co.uk |
Additional content
-
EXPERT KNOWLEDGE Woodturning Tools
