Description

Horizontally or vertically, for screwing, plugging or clamping. Versatile, practical and precise, the 90° squares can be used for positioning or assembling workpieces, and for setting up fences and auxiliary devices.
Screws:

Screwed with wood screws to a wooden panel (workbench top) or directly to a workpiece, the angle can be used anywhere. When fixed upright, auxiliary fences and devices, for example, can be erected quickly and easily at an exact 90° angle.

Plugging: :

if you screw two connecting bushes Ø 20 mm (No. 729506) to the square using M8 screws, it can be inserted vertically or horizontally into the hole grid of MFT plates. For hole spacing 90-100 mm.

Clamping: :

With clamping jaws (No. 714515) or the stop clamps (No. 714517), the square can be clamped to the workpiece corner (inside or outside) as an assembly or glueing aid, e.g. for drawers or carcases, to facilitate exact 90° assembly. The recess on the inside corner ensures full contact when applied to outside surfaces.

Leg length 145 mm, precision-milled from aluminium and anodised.