Crown® Tungsten Extreme Pen Size Carbide Tool, Rounded Square
Product no.:
729660
Brand:
Crown
€76.80 €64.54
per piece(s)
Product mid February 2026 Available
- Blade width 10 x 10 mm
- Handle length 215 mm
- Handle material Black stained ash
- Hardness 93 HRC
- Model Rounded square
Description
Rounded square, for coarse material removal.
These tools enable easy working and can therefore also be used by beginners without any problems. Ideal for turning pens, intricate woodturning or small boxes. The carbide cutters have a long service life, even with abrasive materials such as acrylic, polyester, imitation stone and exotic hardwoods.
Advantages:
Advantages:
- Reduces kick-back significantly
- No complex cutting angles needed - use the scraper flat on the tool rest
- Suitable for both spindle and faceplate work
- No resharpening required – worn carbide edges are simply rotated
Crown® Tungsten Extreme
The replaceable cutters with a hardness of 93 HRC and a careful and elaborate cutting geometry offer a simple, reliable, and effective option for turning. The sharp cutters with a long service life are rotated until all edges are blunt. Once all cutting edges are used up, the carbide cutter is replaced. Black stained ash handle with »Tungsten Extreme« logo.
Comes with German and English instructions.
Comes with German and English instructions.
Properties
| Blade width: | 10 x 10 mm |
|---|---|
| Handle length: | 215 mm |
| Handle material: | Black stained ash |
| Hardness: | 93 HRC |
| Model: | Rounded square |
| Overall length: | 305 mm |
| Shaft diameter: | 8 x 8 mm |
| Steel: | Carbide cutter |
| Typ: | Combination tools and hollowing tools |
Properties
| Blade width: | 10 x 10 mm |
|---|---|
| Handle length: | 215 mm |
| Handle material: | Black stained ash |
| Hardness: | 93 HRC |
| Model: | Rounded square |
| Overall length: | 305 mm |
| Shaft diameter: | 8 x 8 mm |
| Steel: | Carbide cutter |
| Typ: | Combination tools and hollowing tools |
Manufacturer
Crown
Hand-forging and high-grade steels make Crown Tools one of the leading manufacturers of turning tools worldwide. All their tools are made in Sheffield, England, following a long tradition. The blades are made of ultra-edge-holding M2-HSS steel as well as PRO-PM steel for heavy-duty use and ultimate edge life.
| Name: | Crown |
|---|---|
| Mailing address: | 332-334 Coleford Road, Darnall S9 5PH Sheffield United Kingdom |
| Homepage: | https://www.crownhandtools.ltd.uk |
Additional content
-
EXPERT KNOWLEDGE Woodturning Tools
