Crown® Tungsten Extreme Deep Hollowing Tool, XXL
Product no.:
720890
Brand:
Crown
€145.00 €121.85
per piece
Product early March 2027 Available
- Blade diameter 12 mm
- Blade material Carbide cutter
- Handle length 410 mm
- Handle material Black stained ash
- Hardness 93 HRC
Description
Easy-to-handle, lightweight yet very robust tool for removing large quantities of material from deep hollow bodies. The structure of the rectangular, high-edged shaft cross section was inspired by the geometry of beams in structural engineering. It provides maximum torsional and vibration resistance with a shaft that is as thin as possible. The contact surfaces are rounded, allowing the tool to be used in the same manner as that with a round section shank. The large carbide cutter ensures safe and clean working, even under conditions of poor visibility in hollow bodies.
Crown® Tungsten Extreme
The replaceable cutters with a hardness of 93 HRC and a careful and elaborate cutting geometry offer a simple, reliable, and effective option for turning. The sharp cutters with a long service life are rotated until all edges are blunt. Once all cutting edges are used up, the carbide cutter is replaced. Black stained ash handle with Tungsten Extreme logo.Comes with German and English instructions.
Properties
| Blade diameter: | 12 mm |
|---|---|
| Blade material: | Carbide cutter |
| Handle length: | 410 mm |
| Handle material: | Black stained ash |
| Hardness: | 93 HRC |
| Overall length: | 750 mm |
| Shaft diameter: | 19 x 13 mm |
| Type: | Combination tools and hollowing tools |
Properties
| Blade diameter: | 12 mm |
|---|---|
| Blade material: | Carbide cutter |
| Handle length: | 410 mm |
| Handle material: | Black stained ash |
| Hardness: | 93 HRC |
| Overall length: | 750 mm |
| Shaft diameter: | 19 x 13 mm |
| Type: | Combination tools and hollowing tools |
Manufacturer
Crown
Hand-forging and high-grade steels make Crown Tools one of the leading manufacturers of turning tools worldwide. All their tools are made in Sheffield, England, following a long tradition. The blades are made of ultra-edge-holding M2-HSS steel as well as PRO-PM steel for heavy-duty use and ultimate edge life.
| Name: | Crown |
|---|---|
| Mailing address: | 332-334 Coleford Road, Darnall S9 5PH Sheffield United Kingdom |
| Homepage: | https://www.crownhandtools.ltd.uk |
