Crown® Tungsten Extreme Carbide Tool, Rounded Square
Product no.:
720888
Brand:
Crown
€139.00 €116.81
per piece
Delivery time approx. 3-5 working days
- Blade material Carbide cutter
- Blade width 15 x 15 mm
- Handle length 320 mm
- Handle material Black stained ash
- Hardness 93 HRC
Description
Rounded square shape for coarse material removal when working on the outside of bowls and spindle turning.
These tools make it possible to perform the work that is traditionally done by means of a roughing-out gouge, spindle gouge, chisel, bowl gouge and scraper. Easy-to-handle, lightweight yet very robust tool for removing large quantities of material from deep hollow bodies. The structure of the rectangular shaft provides maximum torsional and vibration resistance with a shaft that is as thin as possible. The contact surfaces are rounded, allowing the tool to be used in the same manner as a round section shank.
Advantages:
Advantages:
- Reduces kick-back significantly
- No complex cutting angles needed - use the scraper flat on the tool rest
- Suitable for both spindle and faceplate work
- No resharpening required - worn carbide edges are simply rotated
Crown® Tungsten Extreme Carbide Tool
The replaceable cutters with a hardness of 93 HRC and a careful and elaborate cutting geometry offer a simple, reliable, and effective option for turning. The sharp cutters with a long service life are rotated until all edges are blunt. Once all cutting edges are used up, the carbide cutter is replaced. Black stained ash handle with »Tungsten Extreme« logo.
Comes with German and English instructions.
Comes with German and English instructions.
Properties
| Blade material: | Carbide cutter |
|---|---|
| Blade width: | 15 x 15 mm |
| Handle length: | 320 mm |
| Handle material: | Black stained ash |
| Hardness: | 93 HRC |
| Modell: | Rounded square |
| Overall length: | 565 mm |
| Shaft diameter: | 19 x 13 mm |
| Type: | Combination tools and hollowing tools |
Properties
| Blade material: | Carbide cutter |
|---|---|
| Blade width: | 15 x 15 mm |
| Handle length: | 320 mm |
| Handle material: | Black stained ash |
| Hardness: | 93 HRC |
| Modell: | Rounded square |
| Overall length: | 565 mm |
| Shaft diameter: | 19 x 13 mm |
| Type: | Combination tools and hollowing tools |
Manufacturer
Crown
Hand-forging and high-grade steels make Crown Tools one of the leading manufacturers of turning tools worldwide. All their tools are made in Sheffield, England, following a long tradition. The blades are made of ultra-edge-holding M2-HSS steel as well as PRO-PM steel for heavy-duty use and ultimate edge life.
| Name: | Crown |
|---|---|
| Mailing address: | 332-334 Coleford Road, Darnall S9 5PH Sheffield United Kingdom |
| Homepage: | https://www.crownhandtools.ltd.uk |
