Description

Specially designed for use with rip fences on table- and bandsaws as well as on router tables. The two featherboards can also be mounted one above the other to extend the feather width from 18 mm to 36 mm. Infeed / groove length 100 mm. Incl. T-screws for fastening in T-tracks (2 x 38 mm, 1 x 57 mm).

Better cutting quality, as workpiece vibration is prevented. The rigid foam spring joints absorb energy and thus reduce the risk of recoil on router tables or circular saws. Easier material feed than with plastic or wooden featherboards, due to less counter pressure with the same effect.

Further advantages:

Simply turn compression springs for left-hand or right-hand rotation
The rigid foam leaves no traces on soft wood, even with high contact pressure
Cut springs can be replaced

At the heart of the FeatherPRO featherboards is a special rigid industrial foam made of ethylene vinyl acetate (EVA), which can take heavy loads without permanently changing its shape. This rigid foam and the special shape of the individual segments absorb the energy that can occur, e.g. during material rebound at the circular saw. A real revolution when it comes to featherboards. No more rebounds, no more workpiece flutter, no more broken pressure segments. The rigid foam protects the workpiece, the cutting edge and your hands.