Auto Mach Power Carver

This electric carving tool has a reciprocating cutting head, which allows novice as well as professional carvers to achieve excellent surfaces even under difficult cutting conditions. At just 800 g, the aluminium pressure-injection die-cast housing is very light yet robust and can be used with one hand. Unlike other power carvers, the Auto Mach Power Carver has a removable head which allows lubrication of the push rod and the shaft. This allows a long service life and a push-rod bearing without backlash for precise work. The forged two-layer carving tools are ultra-sharp thanks to their cutting edge of blue paper steel (63 HRC), while the shock-absorbing soft steel layer makes them robust and easy to sharpen. The carving tools are easy to change, thanks to the clamping nut at the cutting head, and are tightened with the supplied wrench. For safety, the cutter only reciprocates when the tool is pressed onto the wood surface. The heat from the motor is dissipated through cooling slits so that the tool can be used in non-stop operation. An integrated safety mechanism automatically switches the power carver to idle speed to prevent the motor from overheating. Comes with German and English instructions. Set contains: Power Carver, No. 715222 sweep 1 / 6 mm; No. 715220 sweep 7 / 6 mm; No. 715217 sweep 7 / 12 mm; No. 715221 sweep 7 bent / 6 mm; No. 715223 V-tool 90°/ 10 mm.