Zapasowe ostrza »Standard« do OrbiCut 40, 2 sztuki

Zapasowe ostrza »Standard« do OrbiCut 40, 2 sztuki
Niewielkie wystawanie ostrza na zaledwie 0,1 mm umożliwia płynną i kontrolowaną pracę. Promień 18,55 mm.
Kirjes Sanding System
Perfect finish to any shape in wood
The quality and perception of any piece of work is largely influenced by its finish. Flat surfaces can easily be finished with a smoothing plane or sandpaper. However, concave or convex shapes, inner surfaces of rectangles and irregular shapes are much more difficult. So far, a machine finish was not possible while a hand surface was extremely time-consuming. This gap has been closed by the Swedish manufacturer Kirjes with its integrated sanding and polish system: it enables a great leap in quality and facilitates working. A sleeve of highly flexible abrasive cloth is fitted on a cylindrical or dome-shaped rubber bulb which is then inflated with a special hand pump through an air valve on the shaft. Such pneumatic drum sanders are very elastic, perfectly conforming to any shape. In addition to sanding sleeves, brush sleeves for polishing are also supplied. They will give your workpiece a polished surface. All inflatable drum sanders are fixed to the drill chuck of a 130 cm flexible shaft. The perfect tool for inner surfaces of carved and turned objects, for hard-to-reach areas, spoons, musical instruments, sculptures, ornaments, wooden toys, jewellery, knife handles etc.
     
    więcej
    mniej
    Tutaj znajdziecie Państwo więcej informacji od producenta
    • Pasuje do No. 707547
    Numer artykułu 707549
    Marka Kirjes
    Dostępny od ręki, czas dostawy ok. 2-4 dni roboczych
    19,90 € na Set
    Zakładka
    Wiele innych wariantów
    Typ Cena Ilość
    Zapasowe ostrza »Standard« do OrbiCut 20, 2 sztuki
    Zapasowe ostrza »Standard« do OrbiCut 20, 2 sztuki
    Perfect finish to any shape in wood
    Niewielkie wystawanie ostrza na zaledwie 0,1 mm umożliwia płynną i kontrolowaną pracę. Promień 9,55 mm.

    Numer artykułu 707548
      16,90 €
     
    Zapasowe ostrza »Standard« do OrbiCut 40, 2 sztuki
    Zapasowe ostrza »Standard« do OrbiCut 40, 2 sztuki
    Perfect finish to any shape in wood
    Niewielkie wystawanie ostrza na zaledwie 0,1 mm umożliwia płynną i kontrolowaną pracę. Promień 18,55 mm.

    Numer artykułu 707549
      19,90 €
     
    Odpowiednie dla

    Odpowiednie dla

    Kirjes OrbiCut 40

    Kirjes OrbiCut 40

    Do stosowania z wałkiem giętkim, wiertarką lub wkrętarką. Oba wymienne ostrza ze stali szybkotnącej są zaprojektowane do szybkiego i skutecznego usuwania materiału i pozwalają uzyskać bardzo gładkie powierzchnie, które wymagają tylko...
    warianty
    95,90 €

    z VAT plus koszty wysyłki

    Numer artykułu 707547