Gubia plana ovalada Crown, corte oblicuo, mango de fresno, hoja de 25 mm

Forjado tradicional - afilado por el profesional

Para acabados largos y transversales de madera. Menor fricción en el apoyo de la palma de la...
Nuestros hierros de torneado Crown M2-HSS están disponibles en tres calidades de agarre :
  • Madera de haya (con borde listo para usar)
  • li>li>li>Haya teñida (con borde de fábrica)ul>.
    Para acabados largos y transversales de madera. Menor fricción en el apoyo de la palma de la mano, más fácil de guiar y girar que con una sección transversal rectangular. Biselado en ángulo en ambos lados.
    Crown Woodturning Tools - Available versions:

    M2-HSS woodturning tools with factory grind
    Crown standard version, the blade material used is an extremely sturdy M2-HSS. Stained beech handle. Approx. 62 HRC.
    M2-HSS woodturning tools with ready-to-use bevel
    The blade material used is an extremely sturdy M2-HSS. The version with ash handle manufactured exclusively for DICTUM is additionally provided with a ready-to-use bevel. Approx. 62 HRC.
    M2-HSS Cryogenic woodturning tools
    Improved edge life and sharpness without compromising on sharpening: Cryogenic hardening is a technically elaborate process, in which the steel is cooled down, computer-controlled, to -185 °C after hardening. After this treatment, the steel has finer carbides that cannot develop during the usual hardening process. This results in excellent properties such as a longer service life than with conventional hardening, a fine cutting edge with reduced burr formation and easier sharpening. Come with ready-to-use bevel and black stained ash handles. Approx. 62 HRC.
    M42-HSS Cryogenic Turning Tools - made of an extra-hard HSS-cobalt alloy
    Extremely long service life and razor-sharp cutting edges: Originally developed to meet the requirements of metal processing, M42 Steel cuts even exotic hardwood or composite materials effortlessly. The steel provides an exceptionally long service life thanks to the addition of 10% cobalt as well as the cryogenic treatment it undergoes at -185°C during the tempering process. This causes fine carbides to form, which help increase the service life and sharpenability of the steel long-term. Come with ready-to-use bevel and black stained ash handles. Approx. 65 HRC.

    PRO-PM woodturning tools - made of ultra hard sintered steel
    The ultimate turning tools: PRO-PM gouges are the top of the line for exotic hardwoods, laminates or wood with mineral inclusions. The alloying of steels has its limits due to their different melting points. During sintering, a new type of steel is created from powder steel under the influence of high temperature and pressure, which would not be miscible in the liquid state. The very high percentage of cobalt (8 %) and tungsten (10.5 %) make them highly durable. The tools hold their edge at least five times longer than conventional HSS tools. Come with ready-to-use bevel and black stained ash handles. Approx. 62 HRC.
       
      más
      menos
      Más informaciónes sobre el fabricante
      • Ancho de hoja 25 mm
      • Longitud total 380 mm
      • Material de tirador Ash
      • Material de hoja Lijado HSS/de fábrica (lijado listo para usar)
      Referencia 720319
      Marca Crown
      Disponible para envío inmediato, entrega en aprox. 2-3 días laborables
      52,00 € por piece(s)
      Bono de afilado incluido, dos servicios de afilado gratuitos
      Muchos más modelos
      Precio Cantidad
      Lijado de fresno, HSS/de fábrica (lijado listo para usar)
      Gubia plana ovalada Crown, corte oblicuo, mango de fresno, hoja de 19 mm
      Referencia 720318
      Ancho de hoja: 19 mm
      Longitud total: 380 mm
      Material de tirador: Ash
        43,50 €  
      Gubia plana ovalada Crown, corte oblicuo, mango de fresno, hoja de 25 mm
      Referencia 720319
      Ancho de hoja: 25 mm
      Longitud total: 380 mm
      Material de tirador: Ash
        52,00 €  
      Ver toda la gama
      Precio Cantidad
      Lijado de fresno, HSS/de fábrica (lijado listo para usar)
      Gubia plana ovalada Crown, corte oblicuo, mango de fresno, hoja de 19 mm
      Referencia 720318
      Ancho de hoja: 19 mm
      Longitud total: 380 mm
      Material de tirador: Ash
        43,50 €  
      Gubia plana ovalada Crown, corte oblicuo, mango de fresno, hoja de 25 mm
      Referencia 720319
      Ancho de hoja: 25 mm
      Longitud total: 380 mm
      Material de tirador: Ash
        52,00 €  
      Haya teñida, HSS/lijado en fábrica (lijado listo para usar)
      Gubia plana ovalada Crown, corte oblicuo, mango de haya barnizada, hoja 19 mm
      Referencia 720358
      Ancho de hoja: 19 mm
      Longitud total: 380 mm
      Material de tirador: Haya teñida
        39,50 €  
      Gubia plana ovalada Crown, corte oblicuo, mango de haya barnizada, hoja 25 mm
      Referencia 720359
      Ancho de hoja: 25 mm
      Longitud total: 380 mm
      Material de tirador: Haya teñida
        46,80 €  
      Ceniza negra, criogénica, HSS/tierra de fábrica (tierra lista para usar)
      Gubia plana ovalada Crown, Cryogenic, corte oblicuo, hoja de 19 mm
      Referencia 701917
      Ancho de hoja: 19 mm
      Longitud total: 380 mm
      Material de tirador: Fresno negro (cryo)
        58,90 €  
      Gubia plana ovalada Crown, Cryogenic, corte oblicuo, hoja de 25 mm
      Referencia 701918
      Ancho de hoja: 25 mm
      Longitud total: 380 mm
      Material de tirador: Fresno negro (cryo)
        66,30 €